IS200JPDMG1A Mark VI printed circuit board GE

Description

Overview

Essential details：IS200JPDMG1A Mark VI printed circuit board GE

Product Description

The IS200JPDMG1A is a PCB component made by General Electric for use within the Mark VI system.  The Mark VI is part of the Speedtronic line of gas and steam turbine management series that has been in use for decades.  The MKVI is one of the most advanced of the series and includes such features as Ethernet communications, triple redundant control configuration within the Control Module, and an HMI Operator Interface built around a PC running on a Windows platform.

IS200JPDMG1A

Superiority products IS200JPDMG1A Mark VI printed circuit board GE

The IS200JPDMG1A is a Power Distribution board.  The board is built with two 50-pin connectors (P1/P2.)  It has twelve fuses that are placed in three lines. The board has one DC62 female connector (JA1) used to connect to a PPDA I/O pack.  The board has two terminal blocks that are placed on opposite sides of the PCB. These terminal blocks provide access to three power buses.  Each screw located on the terminal blocks has a maximum input of 35 amps. The IS200JPDMG1A has a total of thirteen plugs, including three 9-position plugs, seven 2-position plugs,  and three 6-position plugs. The board also includes four varistors, three inductor coils, transistors, resistors, and capacitors.

The IS200JPDMG1A uses DIN-rail mounting.  The board is 6.5 inches by 7 inches. GE publication GEI-100613 will give more information about the specifications, diagnostics, operation, and installation of the JPDM board.