IC200ALG326 GE Analog Output module

Description

Overview

Essential details：IC200ALG326 GE Analog Output module

The IC200ALG326 is an 8-Channel, 13-Bit Current, Analog Output module from the GE Fanuc Versamax Series. The single-ended channels of the IC200ALG326 are all in one group.

The analog output module offers eight 4mA to 20mA analog current-sourcing outputs. When configured in the 0-20mA mode, a current output signal value of 0mA links to a %AQ value of 0 counts, and 20mA corresponds to a %AQ rate of +32,000 counts. In 4-20mA range mode, a value of 0 %AQ counts corresponds to an output current of 4mA. A value of +32,000 %AQ counts corresponds to an output current of 20mA. Installation of the IC200ALG326 in a PLC rack will result in conversion of negative value commands 0mA regardless of the range designated. If the IC200ALG326 is controlled by a Network Interface Unit, it changes any negative value commands to the low end of the range.

The IC200ALG326 output range is default but can easily be configured in conjunction with a jumper to modify the output range. The use of a jumper also allows outputs to keep their last states or default if backplane power or communications are interrupted or the PLC is not operating. The outputs will continue in their last state or default, until different output data is received from the backplane or until field power is detached. If hot insertion of a module is done incorrectly, the operation of other modules on the same backplane may be disturbed.

Technical Specifications

No. of channels:	8 single-ended, one group
Voltage Range:	18 – 30 VDC
Current Range:	4 – 20 mA, 0 – 20 mA
Update Rate:	15 ms
LED Indicators:	FLD PWR, OK
Power Consumption:	50 mA from +5V bus

IC200ALG326

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

IC200ALG326 GE Analog Output module

The IC200ALG326 module is a current analog output module manufactured by GE Fanuc Automation as a member of the VersaMax product family. This unit is a 13-bit module with 8 single-ended channels arranged in a single group. The IC200ALG326 analog output module provides eight 4 to 20 milliamps rated analog current-sourcing output points. When this module is configured for 0 to 20 milliamps of current, it has a current output signal of 0 milliamps with links to the %AQ value with 0 counts. Additionally, the 20 milliamps correspond to the %AQ rate with up to 32,000 counts. While operating in the 4 to 20 milliamps range, the value of 0 %AQ counts match up to the output current of 4 milliamps. The 32,000 %AQ counts value also matches up to the output current of 20 milliamps.

When the GE Fanuc IC200ALG326 current analog output module is installed in the PLC rack, it converts the negative value which commands 0 milliamps irrespective of the designated range. If this module is controlled by the Network Interface Unit or NIU, the negative values changes the commands to the low-end range. The IC200ALG326 module has an output range that is the default, and it allows for easy configuration in concurrence with the jumper that helps to modify the output range. Using the jumper enables the output to keep the last states or the default communication and power if the backplane is interrupted, or the PLC is not operating. The output points continue to default or their last state until the backplane provides different output data or until the field power is disconnected.