IC660BBD110  GE intelligent 16-point discrete input block

The GE Fanuc IC660BBD110 is a stand-alone block I/O that features Sixteen (16) input points. This module supports the Genius bus communication protocol, allowing it be installed near machines without the need of a baseplate, processor or communication adapter installed along the module. This module is an intelligent input module that supports daisy-chain topology and reports directly to a controller or communication adapter connected to the same network.

The IC660BBD110 input channels are designed to receive signal voltage range of 93-132VAC with frequency of 47-63 Hz with nominal value of 115VAC. It has a programmable threshold of 25% to 85% for both ON and OFF states. This module is also equipped with internal channel diagnostics, capable of detecting open and shorted wire. Both diagnostic properties also have programmable thresholds of 25% – 85% and fixed threshold of 10-90%, respectively. This module exhibits an input processing tume of 1 ms with software configurable input filters of 10 to 100 ms, in 10 ms increments. This input filter allow rejection of noise and signal bounces.

The IC660BBD110 module measures 8.83” (22.44cm) x 3.34” (8.48cm) x 3.91” (9.93cm) (HxWxD) and weighs 4 lbs. (1.8 kg). It comes with LED indicators such as Unit OK, I/O enabled and individual input LEDs. It has internal isolation of 1500V from ground to serial bus.

IC660BBD110