A06B-6114-H209 FANUC 2 AXIS SERVO MODULE MDL SVM2-80/80I

The A06B6114H209 Alpha I servo module is a 2-axis SVM2-80/801 unit manufactured by Fanuc for industrial motor control.

Features

The rated input for the 2-axis SVM2-80/801 A06B6114H209 is between 283-339 V with a power rating of 11 kW. The maximum output is 240 V, and both the L-Axis and m-Axis have a rated output current of 19 A. For further details, please refer to manual number B-65282.

Advantages

The servo amplifier αi series offers a range of advantages due to its modular structure, including being more compact, conserving space, outputting less heat, and saving more energy. The following are some specific benefits of the servo amplifier αi series:

1.   Compact design: The servo amplifier αi series is designed to be more compact than conventional amplifiers. The use of the latest low-loss power device and a newly developed highly efficient radiator has made it possible to reduce the depth of the amplifier to 100 mm, which is much thinner than the conventional amplifiers. In addition, the width of the amplifier is also reduced, which means that it requires an average of approximately 30% smaller installation space in the cabinet than the conventional amplifiers.

2.   Reduction in cabling: The servo amplifier αi series reduces the need for cabling, which can save time and money in installation. Amplifiers can be connected with one cable, which reduces the amount of cabling required. Additionally, a ground connection from the motor output terminal block to the flange is included, so external cabling for this connection is no longer required. However, a connection from the top of the flange to the system ground on the control board is still required.

A06B-6114-H209