IC695PSD040H  GE power supply module

The IC695PSD040 is a Power Supply module that is designed for use with the PACSystem RX3i Series of Emerson Automation, formerly by GE Intelligent Platforms (GE IP). This module has an input voltage requirement of 18-30 VDC for module Start and 12-30 VDC for Module Run. It is designed for maximum input power of 60 Watts at full load operation. This Rack Power supply delivers an output voltages of 5.1 VDC with maximum output of 30 Watts an 3.3 VDC with maximum output power of 30 Watts as well while the module’s maximum output power does not exceed 40 Watts. Furthermore, the power supply’s output current are 0-6 Amperes for 5.1 VDC and 0-9 Amperes at 3.3 VDC. The IC695PSD040 also has an 24 VDC output which may be utilized by the user to energize circuits on relay output modules.

This Rack power supply is installed to the Slot 0 of the universal backplane. Only 1 instance of this module is needed per backplane however, this module is not compatible for use in redundant power supply assembly or increased capacity modes. With this, if the rack power demand exceeds the output capability of the IC695PSD040, RX3i modules must be installed to a separate backplane to manage power supply loading. This power supply module though also supports daisy chain connection wherein up to Two (2) IC695PSD040 can be connected however, this does not increase output capacity of the unit.

The IC695PSD040 features a ride through time of 10 ms. This feature refers to the capability of the of the power supply to maintain acceptable level of output from the time the input power has fluctuated below the minimum level or completely lost.

IC695PSD040F