The new PSEN slock2 non-contact magnetic lock security door lock will be released in November at the Industrial Automation and Electronic Components Conference and Exhibition in Nuremberg, Germany.

As a non-contact security door lock with locking capability, PSEN slock series products have been favored by users, because the non-contact security door lock with locking force avoids the risk of locking latch breakage due to long-term wear and tear, and the mechanical door lock will be limited by the installation accuracy. The magnetic guidance of PSEN slock products can allow a certain range of deviations, so PSEN slock products are widely used on protective doors in industrial sites.

As a new generation of upgraded products, PSEN slock2 not only continues the excellent features of the previous generation of products: The non-contact magnetic coded safety sensor meets Category 4 of ISO14119 standard with power lock function, meets the safety level requirements of ISO 13849-1 standard Cat4, Ple, and adds more practical new technology.

Personnel protection function. Locking force monitoring, the new generation of PSEN slock2 upgrade the locking function, the locking function can achieve the highest Cat2, PLc safety level requirements, the requirement is that the product can realize its own fault monitoring and fault output function under the locked state, effectively ensuring the real-time monitoring of the locked state, so as to protect the production safety of personnel.

3HAC046686-002

The locking capability is improved. In the past, the locking force is only 30N when there is no power, and the maximum power is 1000N. The new PSEN slock2 can not only increase the locking force to 110N or 200N when there is no power through adjustment, but also meet the protection locking requirements when there is no power on site. And in the case of power, the highest can reach 2000N strong holding force.
Integrated Safety Device Diagnostic System (SDD) function, a diagnostic system introduced by Peel Magnetic for monitoring the status of advanced safety sensors. It has been applied in PSENcode, PSENmlock, etc. With the help of the safety equipment diagnostic controller, the diagnostic information of the safety sensor can be collected and transmitted, and the trigger time and fault type of the safety sensor can be recorded in real time, providing a quick solution after the shutdown to shorten the downtime. PSEN slock2 integrates the SDD function to effectively monitor its own operating status, protect personnel safety and record operating status.

4. Improved protection level – The new PSEN slock2 security protection level not only supports IP67, but also introduces the IP6K9K high protection level model, and provides the stainless steel model, which can be applied in some occasions with high health requirements.

5. More status display – The new PSEN slock2 has LED status light display on both sides to facilitate status observation under different installations.

The new product PSEN slock2 is a powerful, safe and reliable non-contact magnetic locking safety switch, not only the safety monitoring can meet the Cat4, PLe safety level of ISO 13849-1 standard, but also the locking function has the Cat2, PLc safety level. With Peer magnetic safety control system and diagnostic monitoring system can achieve both high safety level and high diagnostic performance of the industrial site dual safety protection, can be widely used in the automobile manufacturing industry, packaging industry, pharmaceutical industry and so on.