IS200EHPAG1C GE Exciter High Voltage Pulse Amplifier

Product Description

The IS200EHPAG1C is part of the Innovation Series of EX2100 models from General Electric (GE) Industrial Systems. This version is the third in the IS200EHPAG series of models. The IS200EHPAG1C module has eight transformers, six of which are aligned on one edge of the board. Four standoff connectors are also within the board. The standoff connectors allow the board to be attached to a daughter board, and connecting a daughter board will allow the board to be extended. The main purpose of the EHPA board is to interface connected controllers to the power bridge.

On this board, there is an ability to control the heat outputs when excessive heat occurs, when excessive heat occurs, there are six heat sink components that will help dissipate the excessive heat. Some other components and features on this unit include several LED warning lights located on the front edge of the board, over ten transistors, and two central processing unit (CPU) sockets.

The IS200EHPAG1C model is mounted in the Power Conversion cabinet. When mounted in this cabinet, it will be used with a Power Conversion Model (PCM), AC circuit breaker, DC circuit contactor, and an Exciter Gate Pulse Amplifier board (EGPA). The EHPA model can also be used with an Exciter Selector (ESEL) board, which will take the gate commands from the ESEL board within the controller and proceed to generate the gate firing pulses for six silicon-controlled rectifiers (SCRs).