3500/22M 138607-01 Bently Detector module

Description

Overview

Essential details：3500/22M 138607-01 Bently Detector module

Product Description

3500 Monitoring System

The 3500 system is a functional monitoring system designed with the application of microprocessor technology. In addition to meeting the above needs, the 3500 system adds the following advantages:

– Enhanced operator information

– Increased integration with plant control computers

– Reduced installation and maintenance costs

– Improved reliability

– Enhanced operator information

3500/22M-01-01-013500/22M-01-01-01  

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

3500/22M 138607-01 Bently Detector module

Frame interface module

A frame interface module is a full-height module that can communicate with a host (a Bentley. Nevada communication processor) and other modules in the framework communication. They maintain a list of system events and a list of alarm events. The module can be daisy-chained to other framework interface modules and data acquisition /DDE server software.3500 Monitoring system computer software, hardware manual explains the framework interface module daisy-chained to the form of connection.

Communication gateway module

The module is a full-height module that enables peripherals (such as DCS or PLCS) to obtain information from the framework and set up the framework configuration section.

Can be installed in the same frame – a communication channel module on top, each module can support two channels at the same time, the communication channel module can be Daisy chained with other communication channel modules to connect to DCS or PLC.

The monitor module is a full-height module that collects data from various sensors. Any combination of monitor modules can be installed in the 3500 frame.

– 4-channel relay module

This module is a full-height module for standard (or non-redundant) monitoring systems. Its function is to provide four-way relay output

– TMR relay module

The module is a half-height module for triple module redundancy (TMR) systems, two half-height TMR relay modules must operate in the same slot, if the upper or lower relay module is removed or marked as non-OK, the other relay module controls the relay input/output module (there is only one actual relay combination) key phase module

The module is a semi-high module, which is used to power the sensor of the phaser, adjust the key trust signal, and transport the key trust signal for other modules in the frame. The module calculates the speed value at the same time and sends it to the main machine and peripherals (DCS or PLC); Each key module supports 2 channels, each 3500 frame can be installed 2 key modules (up to 4 channels) If two key modules are used, they must be placed in the same full height slot.