AAI835-H50 Digital I/O Module for Compatible ST2

Description

Overview

Essential details：AAI835-H50 Digital I/O Module for Compatible ST2

Product Description

“Digital I/O module compatible with ST2” may mean that the digital I/O module is compatible with the ST2 standard. ST2 may be a specific standard or protocol for communication and interoperability between digital input/output modules.
If a digital I/O module claims to be ST2-compliant, then it should be able to seamlessly connect and interoperate with other ST2-compliant devices or systems. This means that the interface, electrical characteristics, data format and other aspects of the module should match the ST2 standard to ensure reliable data transmission and correct functionality.
To learn more about the specific details of the ST2 standard, you may need to refer to the relevant technical documentation, specifications or further communication with the supplier. This ensures that the digital I/O module you choose meets your specific needs and is compatible with your existing system or device.

AAI143-S00

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

AAI835-H50 Digital I/O Module for Compatible ST2

Product Description

The I/O Modules can be connected to field devices by terminal connection or with a terminal block via a KS cable interface adapter. A customer-furnished MIL cable can also be used to connect to the I/O Module.
The following explains the terminal blocks as well as the signal wiring that can be paired with the I/O Modules.

A pressure clamp terminal block is provided for the terminal connection with field devices. To expand terminals via terminal boards, connect a KS cable adapter to an I/O Module. When using a customer-furnished MIL connector cable, can directly connect to an I/O Module.
A dedicated terminal block is provided for a dual-redundant configuration

l Applicable Cables
Refer to the TI “CENTUM VP Installation Guidance” (TI 33J01J10-01EN), and use the proper cable appropriate for its
installation environment.
l Recommended Cable Thickness
Pressure clamp terminals
Without sleeve: 0.5 to 2 mm2
(AWG20 to 14)
With sleeve: 0.5 to 1.5 mm2
(AWG20 to 16)
M4 crimp terminals
0.5 to 2 mm2
(AWG20 to 14)
l Cable Termination Process when Pressure Clamp Terminals Are Used
ATA4S, ATD5S, ATI3S, ATB5S, ATF9S, A1BT4D, ATA4D, ATD5D, ATI3D, and ATB5D