IS220PVIBH1A Vibration Terminal Board (TVBA)

Description

Overview

Essential details：IS220PVIBH1A Vibration Terminal Board (TVBA)

Product Description

IS220PVIBH1A Technical Specifications

Ambient Temperature Range	-30 to 65 °C
Board Compatibility	Vibration Terminal Board (TVBA)
Channels	Thirteen for Proximity and Vibration
Common Mode Voltage	Min. 5 VDC
Dimensions	3.25″ high x 1.65″ wide x 4.78″ deep
Frame Rates	3.125, 6.25, 12.5, 25, 50, and 100 Hz
Functional Acronym/Abbreviation	PVIB
LED Indicators	4
Probe Power	-24 VDC, 12 mA load per transducer
Status LEDs	Attn, Pwr, Link, TxRx
Revisions	Rev. A, Rev. B, Rev. C, Rev. D
Model Number	IS220PVIBH1A

Frequently Asked Questions about IS220PVIBH1A

What is the function of a IS220PVIBH1A?

The IS220PVIBH1A is a Mark VIe Vibration Monitor I/O Pack that attaches to a terminal board in the Mark VIe system.

IS220PVIBH1A 336A4940CSP16

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

IS220PVIBH1A Vibration Terminal Board (TVBA)

Product Description

The IS220PVIBH1A model was designed as a Vibration Monitor Pack. The main function of the PVIB pack is to provide an electrical interfacing function between up to two I/O Ethernet networks and a vibration terminal board. The main components of this pack are the main processor board which is used with a majority of the MK VIe distributed I/O packs as well as a daughterboard and an acquisition board. 

There are thirteen channels on this pack which are used for collecting and reading proximity and vibration information through several sensor types which are as follows:

• Velomitor

• Seismic

• Proximitors

• Accelerometers

The sensor types are used with different channels, for example, the accelerometers are only used with channels one, two, and three. Please note that channels nine, ten, eleven, and twelve can only be used in supporting proximitors while the thirteenth channel can input a proximity-type or Keyphasor signal type. Note that the thirteen differential inputs on the IS220PVIBH1A pack have a DAC (digital analog converter) which is used for bias adjustment which can void the DC content of the signal which will better center the A/D (analog-to-digital) input range.

The PVIB I/O pack has a processor application code that is used to potentially contain all of the logic codes necessary to allow the pack to operate from singular or dual Ethernet inputs. The network paths necessary to properly operate the IS220PVIBH1A pack are active at all times when being operated from two Ethernet inputs. If for any reason either network fails it will not result in any type of disturbance to the operation of the I/O pack but the failure will be indicated through the operating network connection.