EL3040 EasyLine Continuous Gas Analyzers

Description

Overview

Essential details：EL3040 EasyLine Continuous Gas Analyzers

„ Detectors with different measurement principles for numerous process and emission monitoring applications
„ Up to five measurement components per gas analyzer
„ Suitable for measuring flammable gases
„ Version with protection type II 3G for measurement of non-flammable gases
„ Performance-tested versions for emission monitoring according to Directive 2001/80/EC
„ QAL3 monitoring according to EN 14181 (optional)
„ Automatic calibration including pump and valve control
„ Simplified calibration with air or integral calibration cells eliminating the need for test gas cylinders
„ Customizable analog outputs, digital inputs and digital outputs
„ Modbus and Profibus interface
„ Simple menu-driven operator interface
„ Clear-text status messages
„ Configuration of rarely required functions with included configuration program
„ Self-monitoring function indicates when maintenance is required
„ Housing versions for 19-inch rack mounting (Model EL3020) and wall mounting (Model EL3040)
„ Integral gas feed (optional in Model EL3020)

EL3020

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

EL3040 EasyLine Continuous Gas Analyzers

The following analyzers are available for selection:
• Uras26 infrared photometer for the measurement of infraredactive gas components e.g. CO, NO, SO2
• Magnos206 oxygen analyzer for the measurement of O2 in process gas or in N2
• ZO23 trace oxygen analyzer for the measurement of O2 in pure gases (N2, CO2, Ar)
• Caldos27 thermal conductivity analyzer for the measurement of binary gas mixtures with different thermal conductivity e.g. Ar in O2, H2 in Ar, CH4 in N2
• Electrochemical oxygen sensor for the measurement of O2
The electrochemical oxygen sensor can only be used in combination with the Uras26 infrared photometer.
The Magnos206 oxygen analyzer and the Caldos27 thermal conductivity analyzer can also be used in combination with the Uras26 infrared photometer.
The ZO23 trace oxygen analyzer cannot be used in combination with one of the other analyzers. Only one ZO23 trace oxygen analyzer can be installed in the gas analyzer.
Each analyzer has one physical measurement range per sample component. A section of the physical measurement range can be mapped to the current output (analog output) by on-site configuration. Calibration is always executed in the physical measurement range. The permissible measurement range limits are given by the specification of the smallest and largest measurement ranges for the individual analyzers.
A total of up to five measurement components can be measured with one gas analyzer.