IS220YAICS1A YAIC Analog I/O Packs

Product Description

The IS200STAIS2A is a printed circuit board or PCB component in the Mark VI (MKVI) line by General Electric or GE. This model is identified by General Electric as a Mark VI Analog I/O Pack Terminal Board. This model will be used in conjunction with the IS220YAICS1A Mark VI Safety Analog I/O Pack. This model is often referred to as a Euro Style Box-Type Terminal Block. 

The IS200STAIS2A terminal block contains up to forty-eight (48) small silver terminals made out of metal. Every terminal has been identified with its number written in white print. A long connector port is placed on the opposite end of the IS200STAIS2A. The port is black, with many small female connectors mounted onto silver metal. A variety of different electronic components have been aligned vertically in the center of the IS200STAIS2A. Among these components, there are ten black potentiometers or variable resistors. Alongside every potentiometer is a small black transistor which is half-circle shaped. Four (4) additional potentiometers are grouped at the lower right corner of the IS200STAIS2A. Twenty (20) jumpers which are also black, are situated among these. Each jumper connects a pair of jumper pins made of silver metal, altering the functions of the board. Several small yellow capacitors have been placed around the right half of the IS200STAIS2A. These yellow capacitors have been shaped like very small rectangles. A few integrated circuits may also be seen around the IS200STAIS2A in various places. These integrated circuits are small and contain a tiny network of components.

There are several classified location certifications that the IS200STAIS2A model can be used in, between hazardous and non-hazardous locations. The non-hazardous location of the model is labeled as UL E207685; with the Class I, Division 2, Groups A, B, C, D, and Class I, Zone 2, Group IIC having the same certification.