CFP-DO-403 Digital Output Module NI

Utilizing the preparing point-to-point accessible in LabVIEW Real-Time, the user can perform handling and propelled control of signs. In this application, the program understands one point and passes each point inside capacities specials intended to perform constant capacities as midpoints, high/low counts, standard deviation, and frequency computations. With these projects, the user can undoubtedly set up continuous control cycles without the extra intricacy of gathering information buffers. When the user’s application requires powerful usefulness and quick advancement, the key is adaptable programming that coordinates consummately with the group. LabVIEW is a situation of standard realistic improvement in the business that gives all the fundamental devices to make propelled applications with complete estimation and control highlights.

The National Instruments FP-DO-403 Digital Output Module comes equipped with outputs that sink 2 A for each channel or 16 A squared per module. This Digital Output Module is compatible with voltages from 5 to 30 VDC, has 250 Vrms CAT II continuous channel-to-ground isolation, and is verified by 2,300 Vrms, 5 s dielectric withstand test.

The FP-DO-403 weighs 4.8 oz. It has recommended operating and storage temperature ranges of –40 to 70 °C and –45 to 85 °C respectively, a non-condensing relative humidity range of 10 to 90%, random and sinusoidal operating vibrations of 5 grms and 5 g respectively–all at a frequency range of 10 to 500 Hz. The module is designed to comply with the following electrical safety standards: IEC 61010-1, EN-61010-1, UL 61010-1, and CSA 61010-1.