MVME7100 Single Board Computer Programmer’s Reference

The MVME7100 is a VMEbus board based on the MC8640D and MC8641D Integrated Processors. The MVME7100 provides USB 2.0, and 2eSST VMEbus interfaces, dual 64-bit/100MHz PMC sites, 128MB of NOR flash and up to 32GB of NAND flash, up to 4GB of DDR2 SDRAM, quad 10/100/1000 Ethernet, and five serial ports. The MVME7100 supports front and rear I/O with access to the rear I/O via the MVME7216E transition module.
The MVME7100 provides front panel access to one serial port with a mini DB-9 connector, two 10/100/1000 Ethernet ports with two RJ-45 connectors, and one USB port with one type A connector. The front panel includes a fail indicator LED, user-defined indicator LED, and a reset/abort switch.
The MVME7216E transition module provides rear panel access to four serial ports with one RJ-45 connector per port and two 10/100/1000 Ethernet ports with two RJ-45 connectors.
The RTM also provides two planar connectors for one PIM with front I/O.

The MVME7100 programming model is based on the MC864xD local memory map, which refers to the 36-bit address space seen by the processor as it accesses memory and I/O space. DMA engines also see the same local memory map. All memory accessed by the MC864xD DDR2 SDRAM and local bus memory controllers exists in this memory map in addition to all memory mapped configuration, control, and status registers.

The following sections describe the memory maps for the MVME7100. Refer to the MC864xD Reference Manual for additional details and/or programming information.

MVME7100-0173