SCXI-1304 AC/DC Coupling Terminal Block NI

Packing & Shipping

Package Type: New and original factory separately sealed inner box

Delivery time: Prepare delivery inventory;

The goods will be packed according to the international standard.

1. We will deliver the goods within 3 working days after payment.

2. The new and original factory seal the inner box separately

3. We can send it to you by DHL/TNT/UPS/EMS/ fedex.

Please contact us directly and we will deliver the goods according to your requirements. Best quality assurance

4. We promise that all goods we supply are 100% new and original

5. One year warranty (after delivery date).

Payment method: We accept telegraphic transfer

SCXI-1304

When the National Instruments SCXI 1304 Terminal Block is used with the SCXI-1120/D, SCXI-1125, or SCXI-1126, the channel isolation specification is not valid if the bias resistors are in the engaged setting. The user must keep the resistor switches in the open or G grounded setting, so the isolation remains valid.

The NI SCXI-1304 has the capability for every channel to be configured for AC or DC coupling via the switch settings. Every channel needs two switches in identical positions for the coupling circuitry to work accurately. For AC coupling, the user must designate both switches to the AC setting, which puts single-pole highpass filters in the paths of the positive and negative channel inputs. On the other hand, for DC coupling, the user must set both switches to the DC position. This eliminates the filters from the signal paths and links the screw terminals straight to the module inputs.

It has recommended operating and storage temperature ranges of 0 to 50 °C and –20 to 70 °C respectively, and a non-condensing relative humidity range of 10 to 90%. The SCXI-1304 is designed to comply with the following electrical safety standards: IEC 61010-1, EN 61010-1, UL 3111-1, UL 61010B-1, and CAN/CSA C22.2 No. 1010.1.