Sale!

IS420UCSBH4A  UCSB CONTROLLER MODULE

Part Number: IS420UCSBH4A
Manufacturer: General Electric
Country of Manufacture: United States (USA)
Series: Mark VIe
Function: UCSB Controller
Microprocessor; 600MHz Intel
Memory: 256 MB DDR2 SDRAM
Operating System: QNX Neutrino
Availability: In Stock

Add to quote
Categories: ,

Description

概观

Essential details：IS420UCSBH4A  UCSB CONTROLLER MODULE

Part Number: IS420UCSBH4A
Manufacturer: General Electric
Country of Manufacture: United States (USA)
Series: Mark VIe
Function: UCSB Controller
Microprocessor; 600MHz Intel
Memory: 256 MB DDR2 SDRAM
Operating System: QNX Neutrino
Availability: In Stock

DESCRIPTION:

IS420UCSBH4A is a UCSB Controller Module manufactured by General Electric as part of the Mark VIe Series used in gas turbine control systems with a 1066 MHz Intel EP80579 microprocessor. The application code is executed by standalone computers called UCSB controllers. Through onboard 1/0 network (IONet) interfaces, the controller mounts in a panel and communicates with the I/O packs. Only Mark controls I/O modules and controllers are supported by the private, special-purpose Ethernet network known as IONet. The controller’s operating system (OS) is QNX Neutrino, a real-time, multitasking OS developed for industrial applications requiring great speed and dependability. The UCSB controller lacks any application I/O hosts, in contrast to conventional controllers that host application I/O on a backplane. Additionally, each controller has access to all I/O networks, providing them with all input data.

If a controller is turned down for maintenance or repair, the hardware and software architecture ensures that no single point of application input is lost. Functional safety loops are implemented to achieve SIL 2 and 3 capabilities using the Mark VIeS UCSBSIA Safety controller and Safety 1/0 modules. Operators who are familiar with SIS applications employ Mark Vles Safety equipment to lower risk in crucial safety functions. These particular control hardware and software have IEC 61508 certification and are specifically configured for work with safety controllers and distributed I/O modules.

IS420UCSBH4A

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

sunny  He

[Email] sales@saulcontrol.com

[Mobile] 86-18059884797

[WhatsApp] 86-18059884797

[Skype] sales@saulcontrol.com

IS420UCSBH4A  UCSB CONTROLLER MODULE

The UCSB Controllers offer the Following Advantages:

  • Single module
  • Built-in power supply
  • No jumper settings required
  • No battery
  • No fan (UCSBSIA, UCSBHIA, UCSBH4A)
  • Dual-redundant fans with IS420UCSBH3A
  • Smaller panel footprint
  • Flash memory can be conveniently updated

UCSB INSTALLATION:

A single module that installs directly to the sheet metal of the panel contains the controller. The dimensions for the module envelope and mounting are shown in the diagrams below. Every measurement is in inches. The UCSB must be attached to the panel as depicted, with the vertical airflow through the fins remaining unhindered.

UCSB SOFTWARE AND COMMUNICATION:

Software customized for the controller’s use is installed. Rungs or blocks can be run by it. Without needing to restart, small changes to the control software can be done online. The clocks of the 1/O packs and controllers are synchronized to within 100 microseconds using the IEEE 1588 protocol via the R, S, and T IONets. Through the R, S, and T IONets, external data is sent to and received from the control system database in the controller. This comprises the 1/0 modules’ process inputs and outputs.

Additionally, in a dual system, these are:

1. Data on initialization and internal state variables from the selected controller
2. Information on the synchronization and status of both controllers

This also covers the following in a triple modular redundant (TMR) system:

  • Information on synchronization from all three controllers, internal state values for voting, and status
  • Initialization data from the chosen controller

UCSB BOOT LED:

In the absence of a mistake, the boot LED remains on throughout the boot process. The LED will blink once per second (Hz) if an error is found. The LED blinks for 500 milliseconds, then goes off. The LED stays off for three seconds after the flashing phase. Flash count reveals failed condition.

The boot LED flashes continuously at a Hz rate if the flash image is genuine but the runtime firmware has not yet been loaded. The firmware loads and the boot LED goes off. Use the ToolboxST app to find out why the controller is blocked if it won’t connect online. After receiving an IP address, ToolboxSTplication configures itself over Ethernet.

IS420ESWBH3AX  GE  Analog I/O modules 147663-01 BENTLY Communication analog output module
516TX 336A4940DNP516TX  GE  516TX-A Industrial Ethernet Switch 125800-01 Bently Nevada Key phase input/output module
128277-01  Future Expansion Faceplate  Bently Nevada 140471-01 Bently Nevada Developed I/O module with internal terminal
A413139  PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO 3500/22M 138607-01 Bently  Detector module
D201471 Metso RT node PC AP31 D200137  personality module 3500/94 145988-01 BENTLY Display module
A413188  PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO 3500/42M 176449-02 bently nevada Shaft vibration module
A413331 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO 3500/92 136180-01 bently nevada  Communication gateway module
D201466 Metso RT node PC AP31 D200137  personality module 136180-01 Bently Nevada Communication gateway module
85UVF1A-1QD  Fireye  Integrated Flame Scanner with Internal Flame Relay 3500/92-03-01-00 Bently Nevada 3500/92-03-01-00
516TX 336A4940DNP516TX  GE  A microprocessor device 7264  ABB The four-channel SSI interface module features automatic
516TX-336A4940DNP516TX GE  microcontroller MDB-8E  SARTORIUS Load cell
2MLR-CPUHT HONEYWELL  CPU HT bus function 3500/15 127610-01 Bently Nevada  Digital input module
177313-01-01 BENTLY NEVATA Vibration monitoring module 3500/50 133388-02 BENTLY NEVADA  Tachometer monitoring module 4 channels
PXIE-6556  NI  Automatic industrial control module 3500/40-03-00 176449-01 BENTLY NEVADA  Expansion axial position module
PFCL201CE   ABB   Pressure sensor controller 3500/15 Plastic panel  BENTLY NEVADA   Ac and DC power supplies
MTL BPHM64  Eaton  Safety grid base plate X20CP1586 B&R The core product of B&R’s I/O system line
1794-IF4IXT  Allen Bradley  Flex I/O 1794 series input module IC698PSA350 GE  High capacity power module
1734-IM4 Allen Bradley POINT I/O 4 Point Digital Input Module VMIVME 3215-000 GE  Computer module
1769-ECR Allen-Bradley  Right end cover (ECR) module used together 201TI GE  Microprocessor-based electrical transmitter
136188-02 Bently Nevada  Ethernet /RS232 Modbus I/O module 3500/05-01-02-00-00-01 BENTLY  System rack
AI02J  ABB   Analog input module PM865K02 ABB  controller
DSSA165 ABB  Ac power module 3500/22-01-01-00 138607-01 BENTLY  Transient data interface before and after the size card module
PXIe-1073  NI  PXI Chassis IS420UCSBH4A GE Controller module manufactured by General Electric
F860-CA  HONEYWELL  Series C “fieldbus interface module D201376 METSO Analog input module
DSSA165 ABB  Ac power module D201376 METSO Analog input module
125840-02 Bently Power module IS420UCSBH4A GE Controller module manufactured

Related products