1 Year Warranty
Description
概观
Essential details：IC695PNS001 RX3i Advanced PROFINET Scanner
The PACSystems* IC695PNS001 RX3i PROFINET Scanner and IC695PNS101 RX3i Advanced PROFINET Scanner modules connect a remote universal RX3i I/O rack of Series 90-30 or RX3i modules to a PROFINET I/O Controller. The PROFINET Scanner scans the modules in its rack, retrieving input data and providing output data, and exchanges that data on the PROFINET I/O LAN at the configured production rate.
The PNS manages PROFINET communication and module configuration between an I/O Controller and modules in the remote rack. If network communications are lost, the PNS manages I/O states according to the individual module configurations.
The PNS001 and PNS101 support 10/100/1000 Mbps Copper, 100/1000 Mbps Multimode Fiber, and 100/1000 Mbps Single-mode Fiber. PROFINET communications on the network require 100 or 1000 Mbps link speed. Although 10 Mbps cannot be used for PROFINET communications, 10 Mbps can be used for other types of Ethernet traffic such as PING.
Features of the RX3i PNS001 PROFINET Scanner include:
▪ Configuration services for all supported Series 90-30 and RX3i I/O Modules using Proficy* Machine Edition (PME). For a list of currently supported I/O modules, refer to Supported Modules, Power Supplies and Backplanes.
▪ Support for daisy-chain/line, star, or ring (PROFINET Media Redundancy Protocol (MRP)) topologies.
▪ Four switched Ethernet ports – two 8-conductor RJ-45 shielded twisted pair 10/100/1000 Mbps copper interfaces and two Small Form-factor Pluggable (SFP) cages for user-supplied SFP devices.
▪ The network can include media interfaces of more than one type.
▪ Support for transfer of I/O Device Name to another PNS module using an SD card.
This eliminates the need to connect a configuration tool, such as Proficy Machine Edition when replacing a module.
▪ A front panel Ethernet RJ-45 port for field firmware updates.
IC695PNS001
lf you need to inquire or purchase ,please send the product models to my email or call medirectly .
sunny He
[Email] sales@saulcontrol.com
[Mobile] 86-18059884797
[WhatsApp] 86-18059884797
[Skype] sales@saulcontrol.com
IC695PNS001 RX3i Advanced PROFINET Scanner
The RX3i PNS101 Advanced PROFINET Scanner includes all features of the PNS001 PROFINET Scanner and adds:
▪ Support for Sequence of Events recording with IRIG-B time synchronization of events accurate to 1ms. The PNS101 buffers up to 4000 events from up to four IC694MDL660 32 Circuit Discrete Input modules at a maximum rate of 400 events per second. Unmodulated IRIG B time signals are decoded using either an IC695HSC304 or IC695HSC308 High Speed Counter Module. The PNS101 may also be used as a standard PROFINET scanner when Sequence of Events is disabled.
The RX3i PROFINET Scanner provides 32 bits of input status data and receives 32 bits of output control data. The application program in the I/O Controller system can monitor the input status bits for the PNS module. The output control bits are reserved for future use and have no function at this time.
Upon receiving your RX3i equipment, carefully inspect all shipping containers for damage. If any part of the system is damaged, notify the carrier immediately. The damaged shipping container should be saved as evidence for inspection by the carrier.
As the consignee, it is your responsibility to register a claim with the carrier for damage incurred during shipment.
However, GE Intelligent Platforms will fully cooperate with you, should such action be necessary.
After unpacking the RX3i equipment, record all serial numbers. Serial numbers are required if you should need to contact Customer Care during the warranty period. All shipping containers and all packing material should be saved should it be necessary to transport or ship any part of the system.
