IC694MDL660 24 VDC Positive/Negative Logic Input module    

The 24 VDC Positive/Negative Logic Input module, IC694MDL660, provides 32 discrete input points. The inputs are positive or negative logic inputs and will operate at levels up to 30V.
The inputs are arranged in four isolated groups of eight; each group has its own common. Isolation is provided between the four groups of inputs, however each group of eight inputs is referenced to the same user common connection.
Module MDL660 provides seven selectable input filter times. Filter times can be set from the programmer using the module’s assigned output data references.
This module can be used with either a Box-style (IC694TBB032) or Spring-style (IC694TBS032) front Terminal Block. The Terminal Block is ordered separately.
32 green LEDs indicate the ON/OFF status of points 1 through 32.
The red/green TB LED is green when the module’s removable terminal block is locked in place. It is red when the terminal block is not locked. The module also sends an Addition of Terminal Block or
Loss of Terminal Block message to the RX3i CPU to report the terminal block status.
The blue bands on the label show that MDL660 is a low-voltage module.
This module can be installed in any I/O slot in an RX3i system. It must be used with an RX3i CPU (release 2.90 or later). It cannot be used with a Series 90-30 PLC CPU.
Module MDL660 uses 48 input bits and 16 output bits to exchange point status and filter information with the RX3i CPU.

IC694MDL660