SA920N 3BDH000600R1 remote S900 I/O system

Description

Overview

Essential details：SA920N 3BDH000600R1 remote S900 I/O system

The remote S900 I/O system can be installed in non-hazardous areas or directly in Zone 1 or Zone 2 hazardous area depending on the selected system variant. S900 I/O communicates with the control system level using the PROFIBUS DP standard. The I/O system can be installed directly in the field, therefore the costs for marshalling and wiring are reduced.

The system is sturdy, error-tolerant and easy to service. Integrated disconnection mechanisms allow replacement during operation, meaning that there is no need to interrupt the primary voltage in order to exchange the power supply units.

S900 I/O type N. For installation in safe (= non-hazardous) area.

SA920N Power Supply for 24V DC, for redundant termination unit TU921N (TU16R) in S900 I/O. Do not mix SA910N with SA920N for redundancy (observe Release Notes).

Features and benefits

• Redundancy (Power and Communication)
• Hot Configuration in Run
• Hot Swap functionality
• Extended Diagnostic
• Excellent configuration and diagnostics via FDT/DTM
• G3-coating for all components
• Simplified maintenance with auto-diagnostics
• Powering of communication interfaces and I/O modules
• Hot swap capability in safe area
• Redundant powering
• Alarm in case of power failure (with redundancy)

SA920N

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

SA920N 3BDH000600R1 remote S900 I/O system

The SA920N 3BDH000600R1 S900 I/O System Power supply is a power supply device designed for industrial automation and control systems. This power supply provides high performance, stability and reliability to provide stable power support for I/O systems.

Here are some of the main features and benefits of this power supply:

High Performance design: The power supply uses a high performance design to operate stably over a wide voltage range, providing continuous and reliable power output. This helps ensure the stable operation of the I/O system and avoids failures due to power fluctuations or deficiencies.
Overload and short circuit protection: The SA920N 3BDH000600R1 has overload and short circuit protection, which can automatically cut off the output in case of abnormal power supply and protect the system from damage. This capability enhances the security and reliability of the system.
Low noise and low temperature: The power supply generates low noise and heat during operation, which is conducive to maintaining a good working environment while extending the service life of the equipment.
Easy installation and maintenance: The power supply has a modular design for easy installation and replacement. At the same time, its maintenance is relatively simple, reducing the cost and difficulty of maintenance.
Wide range of applications: SA920N 3BDH000600R1 power supply is suitable for a variety of industrial automation and control systems, including PLC, DCS, SCADA, etc., to meet the power needs of different scenarios.
In order to ensure the normal operation and extend the service life of the power supply, it is recommended that users follow the following usage and maintenance recommendations:

Before installation, ensure that the rated voltage and current of the power supply match the system requirements.
Avoid using the power supply in humid, hot, or dusty environments.
Check the power supply cables and plugs regularly to ensure that they are in good condition.