FC-SSWM01 SC SWITCH MODULE PROGRAM/FORCE/RESET

Programming:

Programming refers to the configuration of a security system or module to define how it responds to various input signals, how it controls the output devices, and sets various parameters and thresholds.
During the programming process, you may need to use specific programming software or tools to connect to the Fc-sswm01 module via serial communication, Ethernet, or other interfaces, and set the required parameters and logic.
Forcing:

The force function allows you to temporarily override or simulate certain input or output states of the system for testing or troubleshooting purposes.
For example, you might want to force an input signal to be high or low to see how the system responds. Or, you might want to force an output device to turn on or off to verify that the system can execute commands correctly.
Caution should be exercised when using coercive features, as the wrong operation can cause the system to enter an unsafe state.
Reset:

The reset function is used to reset a system or module to its initial state.
This is often used to restore the normal operation of a system after testing, maintenance, or a system crash.
The reset operation may erase all previous configurations and Settings, so make sure you have backed up all important data before performing the reset.