SERVOSTAR 406A-C Digital Servo Amplifier S400

WINDOWS is a registered trademark of Microsoft Corp.
HIPERFACE is a registered trademark of Max Stegmann GmbH
EnDat is a registered trademark of Dr.Johannes Heidenhain GmbH
EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH
Technical changes to improve the performance of the equipment may be made without notice ! Printed in the Federal Republic of Germany
All rights reserved. No part of this work may be reproduced in any form (by photocopying, microfilm or any other method) or processed, copied or distributed by electronic means without the written permission of Kollmorgen Europe GmbH.

Categories: ,

Description

Overview


Essential details:SERVOSTAR 406A-C Digital Servo Amplifier S400

DESCRIPTION

WINDOWS is a registered trademark of Microsoft Corp.
HIPERFACE is a registered trademark of Max Stegmann GmbH
EnDat is a registered trademark of Dr.Johannes Heidenhain GmbH
EtherCAT is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH
Technical changes to improve the performance of the equipment may be made without notice ! Printed in the Federal Republic of Germany
All rights reserved. No part of this work may be reproduced in any form (by photocopying, microfilm or any other method) or processed, copied or distributed by electronic means without the written permission of Kollmorgen Europe GmbH.

Exchange of servo amplifier
Only the manufacturer can repair the device. Opening the device voids the warranty.
1. Decommission the device (see chapter 3.4).
2. Demount the device (see chapter 3.6).
3. Contact Kollmorgen and clarify the logistics. Send the device to the address given by Kollmorgen.
4. Install a new device as described in this manual.
5. Setup the servo amplifier as described in this manual.
Exchange of other drive system parts
If parts of the drive system ( for example cables) must be replaced, proceed as follows:
1. Decommission the device (see chapter 3.4).
2. Exchange the parts.
3. Check all connections for correct fastening.
4. Setup the servo amplifier as described in this manual.

SERVOSTAR610-30

Product parameter

Transport
Transport only by qualified personnel in the manufacturer’s original packaging Avoid shocks
Transport temperature -25 to +70°C, max. rate of change 20°C/hour, class 2K3 acc. to EN61800-2, EN 60721-3-1
Transport humidity max. 95% relative humidity, no condensation, class 2K3 acc. to EN61800-2, EN 60721-3-1
If the packaging is damaged, check the unit for visible damage. In such a case, inform the shipper and the manufacturer.

Storage
Storage only in the manufacturer’s original recyclable packaging
Max. stacking height: 8 cartons
Storage temp. –25 to +55°C, max. rate of change 20°C/hr,
class 1K4 acc. to EN61800-2, EN 60721-3-1
Humidity relative humidity max. 5…95%, no condensation,
class 1K3 acc. to EN61800-2, EN 60721-3-1
Storage duration
< 1 year without restriction
> 1 year: capacitors must be re-formed before the servo amplifier is commissioned.
To do this, remove all electrical connections and supply the servo amplifier for about
30 min. from 230V AC, single-phase, on terminals L2 / L3.

APPLICATION

Prohibited use
Other use than described in chapter 2.2 is not intended and can lead to damage with persons, equipment or things.
The use of the servo amplifier in the following environments is prohibited:
– potentially explosive areas
– environments with corrosive and/or electrically conductive acids, alkaline solutions, oils, vapours, dusts
– directly on non-grounded supply networks or on asymmetrically grounded supplies with a voltage >230V.
– on ships or off-shore applications
Commissioning the servo amplifier is prohibited if the machine in which it was installed,
– does not meet the requirements of the EC Machinery Directive
– does not comply with the EMC Directive or with the Low Voltage Directive
– does not comply with any national directives
The control of holding brakes by the SERVOSTAR 400 alone may not be used in applications, where personnel security is to be ensured with the brake.

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Same day shipment of 1000 parts

My company under the Sales and Marketing Department, technical engineering Department, after-sales service department, the department of comprehensive management. We can help your business with good service.

1. Sales Department 24/7 service. Handles your requests for any PLC DCS products in a timely manner with patience and professionalism.

2. The engineering department ensures that the products have no quality problems. All products will be inspected before shipping.

3. The financial department checks the payment and refund in time.

4. The warehouse department will carefully check the list of goods, carefully pack them, and deliver the goods in time.

5. After-sales Service Department has a full-time after-sales service team, subordinate to the sales department, and users can timely respond to service requests.

Shipping

Superiority products SERVOSTAR 406A-C Digital Servo Amplifier S400

ABB PM865K01 3BSE031151R1 BANNER LS4ELQ METSO D100644
GE SR469-P5-HI-A20-E Schneider Electric XBKH70000002M YOKOGAWA PW301
GE SR469-P5-HI-A20 Agilent HP-5517B ABB GFD233A 3BHE022294R0103
GE SR469-P5-HI-A20-E PROSOFT PTQ-PDPMV1 ABB GFD233A103 3BHE022294R0103
ABB S-076N 3BHB009884R0021 ABB PCD232A 3BHE022293R0101 BASLER A404K
ABB 5SDF1045H0002 ABB PPD113B03-26-100100 3BHE023584R2625 NOVOTRON ND32-5610 ND32-5610VS-101-011-31
ABB 3BHL000986P0006 ABB REF542PLUS 1VCF752000 A-B 2098-DSD-030-SE/B
ABB 5SHY3545L0010 3BHB013088R0001 3BHE009681R0101 GVC750BE101 ABB REF542PLUS 1VCR007346 Bentley 330101-00-08-20-12-05
ABB 5SHY4045L0006 3BHB030310R0001 3BHE039203R0101 GVC736CE101 PROSOFT PTQ-PDPMV1 AB 2094-BM01-S/C
ABB 5SHY4045L0001 3BHB018162R0001 3BHE009681R0101 GVC750BE101 ABB PFEA113-65 3BSE050092R65 METSO ACN CS
EATON MP3010 Honeywell CC-IP0101 51410056-175 ABB PPC907BE  3BHE024577R0101
TRICONEX 2101 RELIANCE 61C22A ABB REF615A_1G HAFNAEFCBGC1BQK11G