Description

Overview

Essential details：IS200STAIH2A SIMPLEX ANALOG INPUT TERMINAL BOARD

DESCRIPTION

FUNCTIONAL DESCRIPTION

IS200STAIH2A is a Simplex Analog Input Terminal Board manufactured and designed by General Electric as part of the Mark VIe Series used in distributed control systems. The Simplex Analog Input (STAI) terminal board is a small analog input terminal board that attaches to the pack and supports 10 analog inputs and 2 analog outputs. Two-wire, three-wire, four-wire, or transmitters with external power can all be connected to the 10 analog inputs. Two 0-20 mA 0-20 mA jumper-configurable analog outputs are available, with one supporting 0-200 mA current. The board is only offered in simplex form. The terminal blocks are of the high-density Euro-block type. The board is identified to the pack for system diagnostics by an onboard ID chip.

STAI INSTALLATION:

A sheet metal carrier that is mounted on a DIN rail carries the STAI together with a plastic insulator. The STAI plus insulator can alternatively mount to a sheet metal assembly before being fastened directly to a cabinet. There are two different varieties of Euro-block terminal blocks available:

A permanently mounted terminal block with 48 terminals is present on STAI 1.
A right-angle header on STAI 2 accepts a variety of pluggable terminal blocks that are readily accessible and have a total of 48 terminals.
Typically, shielded twisted pair (#18 AWG) wires are utilized. There is an I/O cable shield terminal available next to the terminal blocks.

It is possible to accept the following analog input and output types:

Two-wire transmitter with analog input.
Three-wire transmitter with analog input.
Four-wire transmitter with analog input.
An externally powered transmitter with an analog input.
Analog input, 5 and 10 volts direct current.
0-20 mA current analog output.
Analog output, current of 0-200 mA.

IS200STAIH2A

Product parameter

SPECIFICATIONS

Part Number: IS200STAIH2A
Manufacturer: General Electric
Series: Mark VIe
Product Type: Simplex Analog Input Terminal Board
Number of channels: 12
Maximum Lead Resistance: 15 Ω
Outputs: 24 V dc
Size: 15.9 cm high x 10.2 cm wide
Operating Temperature: -30 to +65oC
Technology: Surface mount
Repair: 3-7 Days
Country of Origin: USA
Availability: In Stock
Manual: GEH-6721L

APPLICATION

Fig 1: STAI Analog Input Terminal Board

STAI OPERATION:

All of the transmitters have access to 24 V dc power on the terminal board (transducers). With the use of jumpers, current or voltage inputs are selectable. One of the two analog output circuits can be adjusted through a jumper for 4-20 mA or 0-200 mA. Due to the single cable connection, the terminal board cannot be used for TMR applications like TBAI.

STAI DIAGNOSTICS:

The output current is shown by the voltage drop across a series resistor on the board. A diagnostic alarm (fault) is generated by the I/O processor if either of the two outputs becomes unhealthy. The I/O controller queries each ID device that each cable connector on the terminal board has to offer.

The terminal board serial number, board type, revision number, and the placement of the JR, JS, and JT connectors are all encoded on a read-only chip known as the ID device. A hardware incompatibility fault is produced when the I/O controller reads this chip and runs across a mismatch.

STAI CONFIGURATION:

Jumpers are used to configure the terminal board. Refer to the installation diagram to determine where these jumpers should be placed. The available jumpers are as follows:

Current input or voltage input can be chosen using the jumpers J1A through J8A.
Whether the return is linked to common or left open is determined by jumpers J1B through J8B.
Input current is chosen between 1 mA and 20 mA using the jumpers J9A and J10A.
Whether the return is linked to common or left open is determined by jumpers J9B and J10B.
Output 1 is adjusted to 20 mA or 200 mA by jumper J0.

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Same day shipment of 1000 parts

My company under the Sales and Marketing Department, technical engineering Department, after-sales service department, the department of comprehensive management. We can help your business with good service.

1. Sales Department 24/7 service. Handles your requests for any PLC DCS products in a timely manner with patience and professionalism.

2. The engineering department ensures that the products have no quality problems. All products will be inspected before shipping.

3. The financial department checks the payment and refund in time.

4. The warehouse department will carefully check the list of goods, carefully pack them, and deliver the goods in time.

5. After-sales Service Department has a full-time after-sales service team, subordinate to the sales department, and users can timely respond to service requests.

Shipping

Superiority products IS200STAIH2A SIMPLEX ANALOG INPUT TERMINAL BOARD

ABB PM865K01 3BSE031151R1	BANNER LS4ELQ	METSO D100644
GE SR469-P5-HI-A20-E	Schneider Electric XBKH70000002M	YOKOGAWA PW301
GE SR469-P5-HI-A20	Agilent HP-5517B	ABB GFD233A 3BHE022294R0103
GE SR469-P5-HI-A20-E	PROSOFT PTQ-PDPMV1	ABB GFD233A103 3BHE022294R0103
ABB S-076N 3BHB009884R0021	ABB PCD232A 3BHE022293R0101	BASLER A404K
ABB 5SDF1045H0002	ABB PPD113B03-26-100100 3BHE023584R2625	NOVOTRON ND32-5610 ND32-5610VS-101-011-31
ABB 3BHL000986P0006	ABB REF542PLUS 1VCF752000	A-B 2098-DSD-030-SE/B
ABB 5SHY3545L0010 3BHB013088R0001 3BHE009681R0101 GVC750BE101	ABB REF542PLUS 1VCR007346	Bentley 330101-00-08-20-12-05
ABB 5SHY4045L0006 3BHB030310R0001 3BHE039203R0101 GVC736CE101	PROSOFT PTQ-PDPMV1	AB 2094-BM01-S/C
ABB 5SHY4045L0001 3BHB018162R0001 3BHE009681R0101 GVC750BE101	ABB PFEA113-65 3BSE050092R65	METSO ACN CS
EATON MP3010	Honeywell CC-IP0101 51410056-175	ABB PPC907BE 3BHE024577R0101
TRICONEX 2101	RELIANCE 61C22A	ABB REF615A_1G HAFNAEFCBGC1BQK11G