Description

Overview

Essential details：S72402-NANANA S700 Servo Drives Digital Servo Amplifier

DESCRIPTION

Servo amplifiers are safety components that are built into electrical plant or machines, and can only be operated as integral components of such plant or machines.
The manufacturer of the machine must generate a risk assessment for the machine, and take appropriate measures to ensure that unforeseen movements cannot cause injury or damage to any person or property.
If the servo amplifiers are used in residential areas, in business and commercial areas, or in small industrial operations, then additional filter measures must be implemented by the user.
Cabinet and Wiring
The servo amplifiers must only be operated in a closed control cabinet, taking into account the ambient conditions defined on page 27. Ventilation or cooling may be necessary to keep the temperature within the cabinet below 40°C.
Use only copper conductors for wiring. The conductor cross-sections can be derived from the standard IEC 60204 (alternatively for AWG cross-sections: NEC Table 310-16, 60°C or 75°C column).
Power supply
S7xx6 : Servo amplifiers in the S7xx6 series (overvoltage category III acc. to EN 61800-5-1) can be supplied from 1-phase or 3-phase grounded (earthed) industrial supply networks (TN-system, TT-system with grounded neutral point, no more than 42kA symmetrical rated current at 110V-10% to 230V+10%).
S7xx0 : Servo amplifiers in the S7xx0 series (overvoltage category III acc. to EN 61800-5-1) can be supplied from 3-phase grounded (earthed) industrial supply networks (TN-system, TT-system with grounded neutral point, no more than 42kA symmetrical rated current at 208V-10%, 230V, 240V, 400V or 480V+10%).
Periodic overvoltage between phases (L1, L2, L3) and the housing of the servo amplifier must not exceed 1000V crest. In accordance with IEC 61800, voltage spikes (< 50µs) between phases must not exceed 1000V. Voltage spikes (< 50µs) between a phase and the housing must not exceed 2000V.

S72402-NANANA

Product parameter

Other use than described in chapter 2.2 is not intended and can lead to damage of persons, equipment or things.
The use of the servo amplifier in the following environments is prohibited:
– potentially explosive areas
– environments with corrosive and/or electrically conductive acids, alkaline solutions, oils, vapors, dusts
– directly on non-grounded supply networks or on asymmetrically grounded supplies with a voltage >240V.
– on ships or off-shore applications
Commissioning the servo amplifier is prohibited if the machine in which it was installed,
– does not meet the requirements of the EC Machinery Directive
– does not comply with the EMC Directive or with the Low Voltage Directive
– does not comply with any national directives
The control of holding brakes by the S700 alone may not be used in applications, where functional safety is to be ensured with the brake.

APPLICATION

Transport
Transport by qualified personnel in the manufacturer’s original recyclable packaging
Avoid shocks while transporting
Transport temperature: -25 to +70°C, max. rate of change 20K / hour, class 2K3 acc. to EN61800-2, EN 60721-3-1
Transport humidity: max. 95% relative humidity, no condensation, class 2K3 acc. to EN61800-2, EN 60721-3-1
If the packaging is damaged, check the unit for visible damage. In such an event, inform the shipper and the manufacturer.

Storage
Storage only in the manufacturer’s original recyclable packaging Max. stacking height: 8 cartons
Storage temperature: -25 to +55°C, max. rate of change 20K / hour,
class 1K4 acc. to EN61800-2, EN 60721-3-1
Storage humidity: 5 … 95% relative humidity, no condensation,
class 1K3 acc. to EN61800-2, EN 60721-3-1
Storage duration:
Less than 1 year: without restriction.
More than 1 year: capacitors must be re-formed before setting up and operating the
servo amplifier. To do this, remove all electrical connections and apply single-phase
230V AC for about 30 minutes to the terminals L1 and L2.
2.4.4 Maintenance, Cleaning
The devices do not require any maintenance, opening the devices invalidates warranty.
Cleaning : — if the casing is dirty: clean with Isopropanol or similar
NOTICE: Do not immerse or spray
— Dirt inside the unit: must be cleaned by the manufacturer
— For dirty protective grill on fan: clean with a dry brush

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Same day shipment of 1000 parts

My company under the Sales and Marketing Department, technical engineering Department, after-sales service department, the department of comprehensive management. We can help your business with good service.

1. Sales Department 24/7 service. Handles your requests for any PLC DCS products in a timely manner with patience and professionalism.

2. The engineering department ensures that the products have no quality problems. All products will be inspected before shipping.

3. The financial department checks the payment and refund in time.

4. The warehouse department will carefully check the list of goods, carefully pack them, and deliver the goods in time.

5. After-sales Service Department has a full-time after-sales service team, subordinate to the sales department, and users can timely respond to service requests.

Shipping

Superiority products S72402-NANANA S700 Servo Drives Digital Servo Amplifier

ABB PM865K01 3BSE031151R1	BANNER LS4ELQ	METSO D100644
GE SR469-P5-HI-A20-E	Schneider Electric XBKH70000002M	YOKOGAWA PW301
GE SR469-P5-HI-A20	Agilent HP-5517B	ABB GFD233A 3BHE022294R0103
GE SR469-P5-HI-A20-E	PROSOFT PTQ-PDPMV1	ABB GFD233A103 3BHE022294R0103
ABB S-076N 3BHB009884R0021	ABB PCD232A 3BHE022293R0101	BASLER A404K
ABB 5SDF1045H0002	ABB PPD113B03-26-100100 3BHE023584R2625	NOVOTRON ND32-5610 ND32-5610VS-101-011-31
ABB 3BHL000986P0006	ABB REF542PLUS 1VCF752000	A-B 2098-DSD-030-SE/B
ABB 5SHY3545L0010 3BHB013088R0001 3BHE009681R0101 GVC750BE101	ABB REF542PLUS 1VCR007346	Bentley 330101-00-08-20-12-05
ABB 5SHY4045L0006 3BHB030310R0001 3BHE039203R0101 GVC736CE101	PROSOFT PTQ-PDPMV1	AB 2094-BM01-S/C
ABB 5SHY4045L0001 3BHB018162R0001 3BHE009681R0101 GVC750BE101	ABB PFEA113-65 3BSE050092R65	METSO ACN CS
EATON MP3010	Honeywell CC-IP0101 51410056-175	ABB PPC907BE 3BHE024577R0101
TRICONEX 2101	RELIANCE 61C22A	ABB REF615A_1G HAFNAEFCBGC1BQK11G