1C31194G03 VALVE POSITIONER (G03) Westinghouse

Description

Overview

Essential details：1C31194G03 VALVE POSITIONER (G03) Westinghouse

Products Description

1B30023H01 ASSY, I/O BUS TERMINATOR – INTERNAL GUIDES
1B30035H01 BASE ASSY, 2 SLOT STANDARD I/O
1C31116G04 PMOD ASSY, ANALOG INPUT (VOLTAGE W/ TEMP SENSOR) 8CH
1C31122G01 EMOD ASSY, DIGITAL OUTPUT 16CH (5-60VDC)
1C31166G02 EMOD ASSY, LINK CONTROLLER (R1120 CPU)
1C31179G02 EMOD ASSY, MEDIA ATTACHMENT UNIT (4 CHAN)
1C31181G02 PMOD ASSY, MEDIA ATTACHMENT UNIT (4CH – 850NM)
1C31194G01 EMOD ASSY, VALVE POSITIONER (1KHZ) – LEGACY OVATION 3.4 & EARLIER
1C31194G03 EMOD ASSY, VALVE POSITIONER (G03) – OVATION 3.5 & LATER
1C31194G04 EMOD ASSY, VALVE POSITIONER (G04) – OVATION 3.5 & LATER
1C31197G05 PMOD ASSY, VALVE POSITIONER
1C31203G01 EMOD ASSY, REMOTE NODE CONTROLLER
1C31204G01 PMOD ASSY, REMOTE NODE CONTROLLER (850NM FIBER PORT)
1C31219G01 MODULE ASSY, RELAY OUTPUT 16CH
1C31224G01 EMOD ASSY, ANALOG INPUT 8CH 14BIT (4-20MA CURRENT)
1C31227G01 PMOD ASSY, ANALOG INPUT (CURRENT) 8CH
1C31232G03 EMOD ASSY, DIGITAL INPUT 16CH – COMPACT (125V)
1C31233G04 EMOD ASSY, SEQUENCE OF EVENTS INPUT 16CH – COMPACT (CONTACT INPUT)
1C31234G01 EMOD ASSY, CONTACT INPUT W/ ONBOARD 48V WETTING 16CH – COMPACT
1C31238H01 PMOD CAVITY INSERT, COMPACT DIGITAL INPUT / EVENTS INPUT / CONTACT INPUT 16CH
1X00030H01 FUSE MICRO 0.062A 125V VERY FAST ACTING RADIAL PLUG-IN TH
1X00030H02 FUSE MICRO 0.5A 125V VERY FAST ACTING RADIAL PLUG-IN TH
1X00030H04 FUSE MICRO 0.05A 125V VERY FAST ACTING RADIAL PLUG-IN TH
1X00416H01 (LT-Buy) POWER SUPPLY, AC INPUT, 24V 300W & 25V 500W OUT DIN-RAIL MOUNT
1X00529H23 MEDIA CONVERTER, MM, ST, 2KM, HW:REV3; FW:2.0
1X00569H01 PMOD CAVITY INSERT, BLANK (W/ SILKSCREENED PART # ON BOTTOM)
1X00707H06 CIRCUIT BREAKER DIN RAIL MOUNT UL489 BRANCH 250V DC 25A 2-POLE D-TRIP
1X00781H01L DIN-RAIL POWER SUPPLY, 24VDC, 10A
1X00884H01 PMOD CAVITY INSERT, EVENTS INPUT CONTACT INPUT 32CH

1C31194G03

① 1B30035H01 Material control, traceability and labeling. The type, number and requirements of materials and parts required in the production process should be stipulated accordingly to ensure the quality of materials in the process and maintain the applicability and suitability of products in the process. Materials in the process are identified to ensure traceability of material identification and verification status.
② Equipment control and maintenance. Relevant provisions shall be made for equipment, tools and measuring instruments that affect product quality characteristics. Their accuracy shall be verified before use, reasonable storage and protection shall be made between two uses, and regular verification and recalibration shall be made; Develop preventive equipment maintenance plan to ensure equipment accuracy and production capacity to ensure continuous process capability.
(3) Control and management of key production processes. Focus on product characteristics that are not easy to measure, special skills and special processes required for equipment maintenance and operation; Timely improve and correct the deficiencies in the process, monitor, control and verify the process parameters with appropriate frequency during the production process, to ensure that all equipment and operators can 1B30035H01  meet the needs of product quality.
④ Document control. Ensure that the requirements of process planning are fulfilled and that process-related documents used in the process are valid versions.
⑤ Process change control. Ensure the correctness and implementation of process changes, specify the change responsibility and authority, evaluate the product after the change, and verify the expected effect of the change.
⑥ Verify state control. Use appropriate methods to identify the verification status of the process, distinguish between unverified, qualified, or nonconforming products by identification, and identify responsibility for verification by identification.
⑦ Control of unqualified products. Develop and implement nonconforming 1B30035H01 product control procedures, discover nonconforming products in time, clearly identify nonconforming products and store them in isolation, determine and supervise the treatment methods of nonconforming products, prevent customers from receiving nonconforming products and their unintended use, and avoid unnecessary costs arising from further processing of nonconforming products.

Why Choose Us 1C31194G03 VALVE POSITIONER (G03) Westinghouse

We are a professional service provider in the field of industrial automation components. We mainly provide PLC module, DCS card, ESD system card, vibration monitoring system card, turbine control system module, gas generator components, we have established a close cooperative relationship with many PLC and DCS product maintenance service providers. The company has established an e-commerce operation model, which reduces the intermediate links for consumers and provides consumers with high-quality products and satisfactory services. The company has a complete logistics supply system. We can buy directly from abroad and supply equipment and spare parts from different countries and manufacturers to solve your problem.

Packing & Shipping

Package Type: New and original factory separately sealed inner box

Delivery time: Prepare delivery inventory;

The goods will be packed according to the international standard.

1. We will deliver the goods within 3 working days after payment.

2. The new and original factory seal the inner box separately

3. We can send it to you by DHL/TNT/UPS/EMS/ fedex.

Please contact us directly and we will deliver the goods according to your requirements. Best quality assurance

4. We promise that all goods we supply are 100% new and original

5. One year warranty (after delivery date).

Payment method: We accept telegraphic transfer

Superiority products 1C31194G03 VALVE POSITIONER (G03) Westinghouse