IC694MDL754 RX3i Output Module

This unit cannot be removed or inserted with system power energized unless the area is known to be non-hazardous.
An I/O loop assessment must be completed on all energy-limited nodes.
A keying system ensures compatibility between a CHARM and the CHARM terminal block when the CHARM is installed on the terminal block. This product must be used only with KL4505X1-EA1 LS DVC CHARM Terminal. Both CHARM and Terminal have fixed keying preventing any other combination.

Add to quote
Categories: ,

Description

Overview

Essential details：IC694MDL754 RX3i Output Module

DESCRIPTION

The 12/24 volt DC, ESCP 0.75A Positive Logic Output module, IC694MDL754, provides 32 discrete outputs in two isolated groups of 16. Each group has its own common. The outputs are positive logic or sourcing-type outputs; they switch the loads on the positive side of the power supply, and supply current to the load. The outputs can switch user loads over the range of +12 to +24 VDC (+25%, -15%) and can source a maximum current of 0.75 Amps per point.
Each point has electronic overcurrent/short circuit protection and generates an individual fault if either condition exists. In addition to output driver faults being sent back to the RX3i controller, the module provides a loss of field side power fault, ESCP point failure within a group, field terminal block ON/OFF status and a DIP switch configuration mismatch fault.
Each group can be used to drive different loads. For example, one group might drive 24 VDC loads, and the other could drive 12 VDC loads. Power for the loads must be provided by the user.
A DIP switch on back of the module is used to select the outputs default mode: Force Off or Hold Last State. The module must be removed from the backplane to set this switch. This module can be used with either a Box-style (IC694TBB032) or Spring-style (IC694TBS032) front Terminal Block. The Terminal Block is ordered separately.
The blue bands on the label show that MDL754 is a low-voltage module.
This module can be installed in any I/O slot in an RX3i system.
It must be used with an RX3i CPU). It cannot be used with a Series 90-30 PLC CPU.

IC694MDL754

Product parameter

IC694MDL754A 1.00 Initial Release. Compatible with PACSystems RX3i CPU 2.9 firmware only.
IC694MDL754-AB 1.00 Compatible with PACSystems RX3i CPU 3.0 firmware or later.
IC694MDL754-BC 1.10 Backward compatible with all previous versions.
IC694MDL754-CC 1.10 Backward compatible with all previous versions.
IC694MDL754-CD 1.20 Backward compatible with all previous versions

APPLICATION

Two green/yellow LEDs indicate the presence of field power to each of the isolated output groups. They are green if field power is within limits. They are yellow if a point fault exists within their group. And they are off when field power is absent or outside operating limits.
The module’s red/green Terminal Block LED is green when the module’s removable terminal block is locked in place. It is red when the terminal block is not locked. The Terminal Block LED blinks if there is a non-recoverable module fault.
The module also sends an Addition of Terminal Block or Loss of Terminal Block message to the RX3i CPU to report the Terminal Block status.

The DIP switch on back of the module selects the default operation for the module’s outputs. The module must be removed from the backplane to set this switch. Note that there are two DIP switches on the module. Only the upper switch is used for this module.

With the Outputs Default switch in the right (open) position, the outputs mode is set to Force Off. In this mode, the outputs will go to zero whenever communication with the CPU is lost. When the switch is in the left position, the Outputs Default mode is set to Hold Last State. In this mode the outputs will retain their last programmed value whenever communication with the CPU is lost, and field power is present.

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Same day shipment of 1000 parts

My company under the Sales and Marketing Department, technical engineering Department, after-sales service department, the department of comprehensive management. We can help your business with good service.

1. Sales Department 24/7 service. Handles your requests for any PLC DCS products in a timely manner with patience and professionalism.

2. The engineering department ensures that the products have no quality problems. All products will be inspected before shipping.

3. The financial department checks the payment and refund in time.

4. The warehouse department will carefully check the list of goods, carefully pack them, and deliver the goods in time.

5. After-sales Service Department has a full-time after-sales service team, subordinate to the sales department, and users can timely respond to service requests.

Shipping

Superiority products IC694MDL754 RX3i Output Module

PFCL201CE   ABB   Pressure sensor controller KJ2231X1-EA1  4-20 mA Series 2 Card  EMERSON
MTL BPHM64  Eaton  Safety grid base plate 330106-0530-10-02-05  Proximity Probes  Bently Nevada
1794-IF4IXT  Allen Bradley  Flex I/O 1794 series input module Max-4/11/03/032/99/1/1/00  SERVO MOTOR  ELAU
1734-IM4 Allen Bradley POINT I/O 4 Point Digital Input Module 330104-00-08-90-02-05   Proximity Probes  Bently Nevada
1769-ECR Allen-Bradley  Right end cover (ECR) module used together D201139L  Metso RT node PC AP31 D200137  personality module
136188-02 Bently Nevada  Ethernet /RS232 Modbus I/O module D201376  Metso RT node PC AP31 D200137  personality module
AI02J  ABB   Analog input module IS220PRTDH1A 336A4940CSP6  Resistance Temperature Device (RTD) Input Module  GE
DSSA165 ABB  Ac power module IS220PSCAH1A 336A4940CSP9   Mark VI component  GE
PXIe-1073  NI  PXI Chassis IS220PDIAH1BE 336A5026ADP4  Resistance Temperature Device (RTD) Input Module  GE
F860-CA  HONEYWELL  Series C “fieldbus interface module IS420ESWBH3AX  GE  Analog I/O modules
DSSA165 ABB  Ac power module 516TX 336A4940DNP516TX  GE  516TX-A Industrial Ethernet Switch
125840-02 Bently Power module 128277-01  Future Expansion Faceplate  Bently Nevada
125680-01 BENTLY  Displacement detection module A413139  PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO
147663-01 BENTLY Communication analog output module D201471 Metso RT node PC AP31 D200137  personality module
125800-01 Bently Nevada Key phase input/output module A413188  PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO
140471-01 Bently Nevada Developed I/O module with internal terminal A413331 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO
3500/22M 138607-01 Bently  Detector module D201466 Metso RT node PC AP31 D200137  personality module
3500/94 145988-01 BENTLY Display module 85UVF1A-1QD  Fireye  Integrated Flame Scanner with Internal Flame Relay
3500/42M 176449-02 bently nevada Shaft vibration module 516TX 336A4940DNP516TX  GE  A microprocessor device
3500/92 136180-01 bently nevada  Communication gateway module 516TX-336A4940DNP516TX GE  microcontroller
136180-01 Bently Nevada Communication gateway module 2MLR-CPUHT HONEYWELL  CPU HT bus function
3500/92-03-01-00 Bently Nevada 3500/92-03-01-00 177313-01-01 BENTLY NEVATA Vibration monitoring module
7264  ABB The four-channel SSI interface module features automatic PXIE-6556  NI  Automatic industrial control module
MDB-8E  SARTORIUS Load cell PFCL201CE   ABB   Pressure sensor controller
3500/15 127610-01 Bently Nevada  Digital input module MTL BPHM64  Eaton  Safety grid base plate

Related products