Description

Overview

Essential details：PR9376/010-011 speed sensor

Product Description

The PR9376/010-011 is a speed sensor mainly used to measure the speed of rotating machinery. Here are some details about the PR9376/010-011 product:

Manufacturer: This sensor is made by Emerson or its EPRO subsidiary and is part of the PR9376 family.

Application: PR9376/010-011 is widely used in turbo-machinery such as steam engine, gas engine, turbine, compressor, fan, centrifuge to monitor and control the speed of these equipment.

Working principle: The sensor adopts the oscillator design formed by the turbine sensor and the preprocessor. When the sensor probe is close to the metal subject, the amplitude changes, and this change is converted into an electrical output, so that the speed is measured.

Technical specifications:

High resolution, low speed can also output waveform.

Measuring range: 0… 20kHz, suitable for different speed measurement requirements.

Measurement gap: ≤1.5mm, to ensure that the sensor and the measured object maintain a proper distance.

Sensor power supply: 8… 31.2Vdc with a stable supply voltage range.

Temperature range: -30℃… +100℃, to ensure that it can work properly in various environments.

Installation and configuration:

The PR9376/010-011 sensor is available in a variety of models and configurations to meet different measurement environments and requirements.

Sensors can be fitted with mounting threads or rectangular mounting flanges for easy mounting to mechanical equipment.

The measurement range also covers 1mm to 20mm to accommodate different sizes of the object being measured.

Cable length and order number can be selected according to specific needs.

Calibration and maintenance: Before leaving the factory, the sensor has been linearly calibrated using calibration materials, so the user does not need to calibrate again. The user only needs to adjust the air gap between the sensor and the measuring surface to get the desired signal from the output of the preprocessor.

Dynamic performance:

The sensitivity is 2 volts/mm (50.8 mV/ mil) and the maximum error is ±1.5%.

The long-term drift is less than 0.3% to ensure the stability of the measurement results.

The static range is 4 mm (0.157 in) to adapt to different measurement environments.

PR9376/010-011

Product parameter

The parameters of the PR9376/010-011 speed sensor are as follows:

Measurement principle: non-contact Hall effect sensor, by mechanical means to achieve non-contact trigger marking.

Trigger marking material: magnetic soft iron or steel.

Trigger frequency range: 0… 12 kilohertz.

Allowable clearance:

Module =1; 1.0 mm

Modules ≥2; 1.5 mm

Output voltage (12 VDC at 100 Kload) : High >10 V/Low <1V.

Pulse rise and fall time: <1µs.

Dynamic output resistance: <1 kΩ.

Allowable load: resistive load 400 ohms, capacitive load 30 nF.

Power supply voltage: 10… 30V, 10% ripple allowed, current consumption up to 25 mA at 25°C and 24 V.

Operating temperature range: Depending on the data, the range may vary, but generally between -35 °C to +380 °C or 35°C to 180°C.

Size and appearance: Stainless steel sensor housing, electronic circuit is completely sealed, sensor head is made of synthetic resin, reinforced by copper pipe, teflon isolation connecting cable.

APPLICATION

The PR9376/010-011 speed sensor is mainly used to measure the speed of rotating machinery, and its application scenarios include but are not limited to the following:

Steam engine, gas engine, water turbine: These equipment need to monitor the speed in real time during operation to ensure that its operation is in a safe and stable range. The PR9376/010-011 sensor can provide accurate speed measurement data to help operators grasp the operating status of the equipment in time.

Compressors, fans, centrifuges and other turbo-machinery: these devices also need speed sensors to monitor their operating status. By measuring the rotational speed, you can determine whether the device is in normal working condition and whether maintenance or adjustment is required.

Power systems: In power systems, speed sensors also play an important role. For example, in the operation of the generator set, it is necessary to monitor its speed in real time to ensure the stability and reliability of the power output. The PR9376/010-011 sensor can provide high precision speed measurement data to meet the needs of power system speed monitoring.

In short, the PR9376/010-011 speed sensor is widely used in various scenarios where the speed of rotating machinery needs to be measured. Its features such as high resolution, wide measurement range, stable supply voltage and wide operating temperature range make it a reliable and practical speed measurement tool.

Shipping

Superiority products PR9376/010-011 speed sensor

PFCL201CE ABB Pressure sensor controller	KJ2231X1-EA1 4-20 mA Series 2 Card EMERSON
MTL BPHM64 Eaton Safety grid base plate	330106-0530-10-02-05 Proximity Probes Bently Nevada
1794-IF4IXT Allen Bradley Flex I/O 1794 series input module	Max-4/11/03/032/99/1/1/00 SERVO MOTOR ELAU
1734-IM4 Allen Bradley POINT I/O 4 Point Digital Input Module	330104-00-08-90-02-05 Proximity Probes Bently Nevada
1769-ECR Allen-Bradley Right end cover (ECR) module used together	D201139L Metso RT node PC AP31 D200137 personality module
136188-02 Bently Nevada Ethernet /RS232 Modbus I/O module	D201376 Metso RT node PC AP31 D200137 personality module
AI02J ABB Analog input module	IS220PRTDH1A 336A4940CSP6 Resistance Temperature Device (RTD) Input Module GE
DSSA165 ABB Ac power module	IS220PSCAH1A 336A4940CSP9 Mark VI component GE
PXIe-1073 NI PXI Chassis	IS220PDIAH1BE 336A5026ADP4 Resistance Temperature Device (RTD) Input Module GE
F860-CA HONEYWELL Series C “fieldbus interface module	IS420ESWBH3AX GE Analog I/O modules
DSSA165 ABB Ac power module	516TX 336A4940DNP516TX GE 516TX-A Industrial Ethernet Switch
125840-02 Bently Power module	128277-01 Future Expansion Faceplate Bently Nevada
125680-01 BENTLY Displacement detection module	A413139 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY METSO
147663-01 BENTLY Communication analog output module	D201471 Metso RT node PC AP31 D200137 personality module
125800-01 Bently Nevada Key phase input/output module	A413188 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY METSO
140471-01 Bently Nevada Developed I/O module with internal terminal	A413331 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY METSO
3500/22M 138607-01 Bently Detector module	D201466 Metso RT node PC AP31 D200137 personality module
3500/94 145988-01 BENTLY Display module	85UVF1A-1QD Fireye Integrated Flame Scanner with Internal Flame Relay
3500/42M 176449-02 bently nevada Shaft vibration module	516TX 336A4940DNP516TX GE A microprocessor device
3500/92 136180-01 bently nevada Communication gateway module	516TX-336A4940DNP516TX GE microcontroller
136180-01 Bently Nevada Communication gateway module	2MLR-CPUHT HONEYWELL CPU HT bus function
3500/92-03-01-00 Bently Nevada 3500/92-03-01-00	177313-01-01 BENTLY NEVATA Vibration monitoring module
7264 ABB The four-channel SSI interface module features automatic	PXIE-6556 NI Automatic industrial control module
MDB-8E SARTORIUS Load cell	PFCL201CE ABB Pressure sensor controller
3500/15 127610-01 Bently Nevada Digital input module	MTL BPHM64 Eaton Safety grid base plate