Description

Overview

Essential details：8440-2028 Digital I/O Expansion Board

Product Description

The PLX35-NB2 Network Bridge is the ideal solution for system integrators, machine builders, and OEMs requiring remote system access for commissioning, troubleshooting, or network maintenance.
During the commissioning phase, a network bridge is deployed on site with automation equipment. Once the equipment is installed and ready for configuration and programming, the bridge allows the user to remotely access the network to commission, maintain, and troubleshoot the system, thereby reducing travel time costs.
By deploying a network bridge to an existing network, the network bridge allows access from anywhere by authorized personnel. In the event of unscheduled downtime, an authorized user can connect to the network to minimize downtime and loss of profit.
Module configuration and remote connections are accomplished through Belden Horizon™, ProSoft Technology’s secure, cloud-native platform for the Industrial Internet of Things (IoT).

The PLX35-NB2 allows users to:
• Securely connect to remote devices from any PC without having to use a 3rd-party software application
• Locally control the VPN connection through an EtherNet/IP® message.
The PLX35-NB2 provides 2 Ethernet ports. One port is used for the local network requiring remote access. The second port is used to connect to the internet.

PLX31-EIP-MBS4

Product parameter

Power 24 VDC nominal, 10 to 36 VDC allowed, Positive, Negative, and
GND terminals
Power Connector Three pin, screw terminal, screw retention, black
Current Load 24 VDC nominal @300 mA
Internal Specs
EtherNet/IP Supports local control of VPN access through MSG instruction.
Network Ports HTTP or HTTPS ports 80
Physical
Enclosure Extruded aluminum with DIN clip
Dimensions
(H x W x D)
5.52 x 2.06 x 4.37 in
14.01 x 5.24 x 11.09 cm
Shock IEC 60068-2-27; 20G @ 11ms (Operational)
IEC 60068-2-27; 30G @ 11ms (Non-Operational)
Vibration IEC 60068-2-6; 10G, 10 to 150 Hz
Ethernet Port (2) 10/100 Base-T, RJ45 connector
Environmental
Operating Temperature IEC 60068; -22°F to +158°F (-30°C to +70°C)
Humidity IEC 60068-30; 5% to 95%, with no condensation
External Power 10 to 30 VDC
Peak Power Consumption < 6W

APPLICATION

The module has one visible set of jumper pins on the back of the gateway. These pins should only be jumped/shunted when resetting the gateway back to factory defaults.
To perform a factory reset:
1 Set the jumper on both pins and power-cycle the module.
2 Wait until the FLT, CFG and ERR LED’s flash in a reverse-clockwise direction (the gateway should boot twice by then).
3 You will notice all the LED’s flashing twice (except interface LED’s).
4 Remove the jumper and wait for the gateway to finish the power-cycle.
5 When the factory reset has finished, the CFG LED flashes.

The Failover process provides a recovery mechanism whenever a serious malfunction renders the main filesystem inoperable.
If the system fails to boot up (all LEDs are solid on) 4 times in a row, on the 5th boot up the gateway will enter a failover state (the FLT LED is solid red and the CFG LED blinks amber). While in this state, the PLX35-NB2 can be accessible using its default configuration. A new upgrade can be performed on the gateway which should fix the serious malfunction that led to the failover state.

Shipping

Superiority products 8440-2028 Digital I/O Expansion Board

PFCL201CE ABB Pressure sensor controller	KJ2231X1-EA1 4-20 mA Series 2 Card EMERSON
MTL BPHM64 Eaton Safety grid base plate	330106-0530-10-02-05 Proximity Probes Bently Nevada
1794-IF4IXT Allen Bradley Flex I/O 1794 series input module	Max-4/11/03/032/99/1/1/00 SERVO MOTOR ELAU
1734-IM4 Allen Bradley POINT I/O 4 Point Digital Input Module	330104-00-08-90-02-05 Proximity Probes Bently Nevada
1769-ECR Allen-Bradley Right end cover (ECR) module used together	D201139L Metso RT node PC AP31 D200137 personality module
136188-02 Bently Nevada Ethernet /RS232 Modbus I/O module	D201376 Metso RT node PC AP31 D200137 personality module
AI02J ABB Analog input module	IS220PRTDH1A 336A4940CSP6 Resistance Temperature Device (RTD) Input Module GE
DSSA165 ABB Ac power module	IS220PSCAH1A 336A4940CSP9 Mark VI component GE
PXIe-1073 NI PXI Chassis	IS220PDIAH1BE 336A5026ADP4 Resistance Temperature Device (RTD) Input Module GE
F860-CA HONEYWELL Series C “fieldbus interface module	IS420ESWBH3AX GE Analog I/O modules
DSSA165 ABB Ac power module	516TX 336A4940DNP516TX GE 516TX-A Industrial Ethernet Switch
125840-02 Bently Power module	128277-01 Future Expansion Faceplate Bently Nevada
125680-01 BENTLY Displacement detection module	A413139 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY METSO
147663-01 BENTLY Communication analog output module	D201471 Metso RT node PC AP31 D200137 personality module
125800-01 Bently Nevada Key phase input/output module	A413188 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY METSO
140471-01 Bently Nevada Developed I/O module with internal terminal	A413331 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY METSO
3500/22M 138607-01 Bently Detector module	D201466 Metso RT node PC AP31 D200137 personality module
3500/94 145988-01 BENTLY Display module	85UVF1A-1QD Fireye Integrated Flame Scanner with Internal Flame Relay
3500/42M 176449-02 bently nevada Shaft vibration module	516TX 336A4940DNP516TX GE A microprocessor device
3500/92 136180-01 bently nevada Communication gateway module	516TX-336A4940DNP516TX GE microcontroller
136180-01 Bently Nevada Communication gateway module	2MLR-CPUHT HONEYWELL CPU HT bus function
3500/92-03-01-00 Bently Nevada 3500/92-03-01-00	177313-01-01 BENTLY NEVATA Vibration monitoring module
7264 ABB The four-channel SSI interface module features automatic	PXIE-6556 NI Automatic industrial control module
MDB-8E SARTORIUS Load cell	PFCL201CE ABB Pressure sensor controller
3500/15 127610-01 Bently Nevada Digital input module	MTL BPHM64 Eaton Safety grid base plate