1 Year Warranty
Description
Overview
Essential details：1794-OE8H HART-enabled analog output module
Product Description
Product Type: This module is a HART-enabled analog output module suitable for working with HART-enabled field devices using the 0 to 20 mA current range.
Number of channels: Eight single-ended, non-isolated, non-dedicated HART modem channels are available.
Configuration: Modules can be configured for a variety of applications, including digital HART sensors and/or traditional analog sensors that require high interchannel isolation.
Indicator: It has 8 yellow HART communication indicators and 1 green power indicator.
Power requirements: The power supply voltage of the module is 24V DC and the typical current is 190 mA.
Isolation voltage: The isolation voltage of the module is 50V continuous, and the basic insulation type is tested between the field side and the system.
Power consumption: Maximum power consumption is 6.1W@31.2V DC.
Thermal dissipation: The maximum thermal dissipation is 20.8 BTU/ hr@31.2V DC.
Recommended connector: 1794-TB3G or 1794-TB3GS connector is recommended.
Wiring specifications: Shielded wire is recommended, and the diameter of the wire is determined by the installed wiring base.
Compatibility: Compatible with HART 5 protocol, support 2-wire devices.
Operating temperature range: -20… 70 °C (-4… 185 °F).
Installation Guide and user manual: For more information on installation and operation, refer to the installation guide and user manual provided by the manufacturer
1794-OE4
Product parameter
The 1794-OE8H module is suitable for ControlNet, EtherNet/IP or PROFIBUS DP networks and can connect one HART field device per channel. The module also provides a line break detection function for each channel. In terms of accuracy, the accuracy drift of the current input with temperature is 0.0069% full range /°C, and the voltage input is 0.0045% full range /°C. In addition, the module does not require calibration
APPLICATION
Industrial automation: Used to measure the forces of manipulators, robots and other industrial equipment.
Test measurement: used to test the tensile, compression and other mechanical properties of materials.
Medical device: Used to measure the force applied by a medical device.
Food industry: Used to detect the weight of packaging materials and packaging containers.
Chemical industry: Used to weigh and monitor the weight of liquids and solids.
Logistics: Used to weigh and monitor the weight of goods in transit.
Superiority products 1794-OE8H HART-enabled analog output module
| UFC762AE101 3BHE006412R0101Â Main board module | IC697CMM742-DCÂ Series 90-70 Communications Module |
| 87199-01Â Stator insulation monitor | FC-TSRO-0824Â Digital Output Field Termination Assembly |
| MVME55006E-0161RÂ VMEbus Single-Board Computer | MVC3001-4003AÂ ALSPA MV3000 Delta Controller |
| 3500/25 149369-01Â Keyphasor module | 6SM57M-3.000Â Synchronous Servomotors |
| 3500/92 136180-01Â Keyphasor module | 05701-A-0282Â Modbus Interface Module Kit RS422/485 |
| 1X00416H01Â POWER SUPPLYÂ 24V 300W & 25V 500W OUT DIN-RAIL MOUNT | 3500/91 190782-01Â EGD gateway module |
| 5X00241G02 Ovation Westinghouse Controller module | 05701-A-0361 System 57 MODBUS Interface |
| 489-P5-LO-A20Â generator management relay | 3500/65 145988-02Â 16-Channel Temperature Monitor |
| TRICONÂ 3805EÂ TRICONEXÂ Analog Output Modules | 3500/65Â 172103-01 16-Channel Temperature Monitor |
| 5X00226G02 Ovation Westinghouse Controller module | 136188-02 Ethernet/RS485 Modbus I/O Module |
| MC-4/11/10/400Â PowerDrive Motion Controller | PCI-6733Â Analog Output Device |
| 2MLR-CPUH/T  MasterLogic Programmable Logic Controller | 3ASC25H209 DATX110  I/O board control module |
| KJ4002X1-BA1Â Left 8 Wide Vertical Carrier | CE4002S1T2B5Â Standard I/O Termination Block |
| S72402-NANANAÂ S700Â digital servo drive | CE4005S2B4Â Standard I/O Termination Block |
| SCYC55830 58063282AÂ Trigger plate | PCI-4462Â Sound and Vibration Device |
| IC697CMM742-DC Ethernet Interface Communications Modules | TU890 3BSC690075R1 compact MTU for the S800 I/O |
| PPC322BE1 HIEE300900R1Â Industrial drive function module | KJ4001X1-BE1 12P0818X072 REV:LÂ 8 Wide I/O Carrier with Shield Bar |
| VMIVME-3122Â High-Performance 16-Bit Analog-to-Digital Converter (ADC) | KJ2201X1-JA1Â Redundant SLS Terminal Block |
