IC200PWR001D 24VDC Power Supply GE

24VDC Power Supply IC200PWR001 provides backplane power for CPU, NIU, and I/O modules. It supplies up to 1.5 Amps output current via 3.3 volt and 5 volt outputs, with up to 0.25 Amp on the 3.3 Volt output. This is ample power for most installations. Module backplane current consumption is summarized in appendix C.

When mounted on the CPU or NIU module, it serves as the main power supply for the station. It can also be used as a supplemental power supply when mounted on a Power Supply Booster Carrier. Refer to the Power Supply Booster Carrier section of chapter 4 for more information.

IC200PWR001D

The GE Fanuc IC200PWR001 power supply input module offers backplane power for I/O, CPU, and NIU modules. It supplies a maximum of 1.5 Amps of output current via 5 Volts and 3.3 Volts rated outputs, with a maximum of 0.25 Amps of current on the 3.3 Volts output voltage rating. It can serve as the main power supply when mounted on the station’s NIU or CPU module. It can also act as a secondary power supply for larger I/O applications or when installed on a power supply booster. The GE Fanuc IC200PWR001 power supply input module has an input voltage of 24 Volts DC and an output voltage of 5 Volts DC and 3.3 Volts DC. The power supply has an input power rating of 10 Watts and a holdup time of up to 10 milliseconds. This module has no extended power and isolated power options.

The GE Fanuc Versamax IC200PWR001 power supply input module has an inrush current rating of 20 Amps at 24 Volts DC and one of 25 Amps at 30 Volts DC. It can protect itself against reverse polarity, short circuits, and overloading. The power supply module has a maximum total output of 1.5 Amps. It also has an output current of up to 0.25 Amps at 3.3 Volts and output current rating not exceeding 1.5 Amps minus the 3.3 Volts of voltage that is used up at 5 Volts. During the wiring, the DC power needs to be grounded to the earth/frame ground. This module has dimensions of 49 millimeters (1.93 inches) x 133.4 millimeters (5.25 inches) x 39 millimeters (1.54 inches) excluding the height of the DIN rail and the carrier.