133323-01  Comms Gateway I/O Module Bently Nevada

9200 and 74712 Vibration speed sensors
Unless otherwise stated, specifications are measured at +22°c (+72°F) and 25 mm/s (1 in/s) at 100Hz.
Electrical characteristics
Sensitivity: 20mV/mm/s (500mV/in/s)±5% at 10OHz(6,000 cpm) and 25mm/s(1 in/s) zero to peak ±5% at 10OHz(6,000 cpm) when properly terminated and positioned at the calibration Angle
Frequency response: from a small operating frequency (see ordering information) to 1kHz(60,000 cpm); Typical values range from +0 to ±3dB Impact resistance: Withstands 50g peak acceleration
Lateral sensitivity :±10%
Lead length: Longer 305m(1,000 ft) between the vibration and 3300 monitor. Frequency attenuation as length increases. Environmental restriction
Service and storage temperature:
9200:-29°c to +21°c(-20°F to +250°F)
74712:-29°c to +204° c(-20°F to +400°F)
Environment: Dust and moisture proof. Note: Please consult your local Bentley Nevada sales staff regarding the use of sensors in radiation environments Relative Humidity :95% non-condensing. *** do not soak when ordering integral cable
Characteristic physics
Height: Typical value 102mm (4 in) (depending on joint options) Diameter: Typical value 41mm (1.6 in)
Weight: Typical value 480g (17 ounces) Electrical characteristics
Velocity to displacement converter
Model 9513 requires -18 vdc. Model 46687 requires -24 vdc
Output sensitivity (input is 500 mv/in/s)