The GE RS-FS-9010-03 photosensitive fire detector is an advanced flame detection device designed for industrial environments. The detector detects specific wavelengths of ultraviolet, infrared and visible light produced by the flame, as well as the flicker frequency of the flame, enabling rapid response and accurate identification of fires. It has the characteristics of high sensitivity, fast response time, wide viewing Angle and stable signal output.

In terms of technical parameters, the explosion-proof rating of RS-FS-9010-03 is CENEL EC EExdⅡ BT5, the sensitivity can be adjusted, there are four ranges (15m/30m/45m/60m) can be set, the response time is 2 seconds, the horizontal and vertical viewing Angle is 90°, the power supply range is 18 to 32V DC.

RS-FS-9001 362A1052P004

The power consumption is 200mA in normal operation and 150mA in alarm. In addition, the detector also has automatic and manual self-check function, signal output of 4 to 20mA DC, relay contact capacity of 2A, 30V DC or 250V AC when alarm; The fault is also 2A, 30V DC or 250V AC. Operating temperature range is -40 to 70 degrees Celsius.

The RS-FS-9010-03 detector is suitable for a variety of industrial environments, especially smokeless liquid and gas fires, open flames that produce smoke, and places where deflagrations can occur, such as heavy industry applications, tunnel engineering, oil and gas storage tank areas, power and petrochemical industries. These characteristics make it an important tool for fire prevention and monitoring in the field of industrial safety.