The 95DSS2-1 is an all-in-one flame detector from Fireye, model S2, with the following detailed features and parameters:

Sensor type: This model has infrared (IR) and ultraviolet (UV) dual sensors, can detect a variety of fuel mixed burning conditions, suitable for coal, oil and gas and other different fuel combustion process.

Shell material: Cast aluminum, coated with grey polyester powder, NEMA 4X, IP66, suitable for Class I Division 2, Groups A, B, C & D and Class II Division 2, Groups F & G environments.

Size and weight: Please refer to the product manual for specific sizes, the weight of the non-” CG” model is about 1.96 kg, and the weight of the “CG” model (including cable) is about 2.69 kg.

Installation requirements: A mounting flange with two threaded connections is required, which can be ordered separately. If used in optical fiber installation conditions, refer to file CU-101.

Electrical parameters:

Input power supply: 24 Vdc, supply current is about 0.35 A.

Electrical connections: 12-pin right Angle rotary quick release connector, “CG” model with stuffing box and 10 ft (3 m) long cable.
Relay outputs: Flame relays (SPST, N.O.) and fault relays (SPST, N.C.) with contact capacities ranging from 10 mA @ 5 Vdc to 2 A @ 240 Vac.
Analog output: 4-20 mA DC current, 24Vdc common end, maximum connection load 750 ohms.
Status indicator: 8-digit alphanumeric LED display, scrollable.

Operator interface: Operation via 4 push-button keypads.

Cable specification: 12-core cable, foil wrapped full braided shield, maximum cable length of 1000 feet (about 305 meters).

Certification: The product is TUV certified, according to DIN EN61511-1, flame detector as a separate device, safety instrument function (SIF) level SIL2.

Application: Suitable for the detection of the target flame under single burner or multi-burner conditions, it can perfectly replace the Fireye 45FS1 and 45UVFS1 series probes, as well as the 45RM4 series probes.

Model List: The 95DSS2-1 model has basic infrared sensor, UV sensor, flame relay, fault relay, 4-20 mA output and other functions.

The design of the flame detector meets the high requirements of flame monitoring in the industrial combustion process and ensures the safety and efficiency of the combustion system.