05701-A-0282 Modbus Interface Module Kit RS422/485

Description

Overview

Essential details：05701-A-0282 Modbus Interface Module Kit RS422/485

Product Description

The System 57 MODBUS Interface provides a facility for digital communication between the System 57 Control System and an external computer system. MODBUS is a well supported digital data communication protocol which provides a set of standard commands by which system data can be communicated. Two different interface modules are available to support the most widely used electrical interface standards, thereby ensuring compatibility with most external systems. Using the MODBUS Interface it is possible to read configuration, alarm status and other information from any channel in the rack and to perform calibration and other procedures.
The MODBUS Interface is commonly used to connect the System 57 Control System to plant control systems to provide central monitoring of system status often with graphical display.
The principal features of the MODBUS Interface are: Easily fitted to the Engineering Card. Compatible with 5701, 5704 and 5704F Control Cards. Simple field connections, via the DC Input Card terminal block, for wire up to 2.5mm² (14 AWG). Operates as a MODBUS RTU. Supports functions 02, 03, 04, 06 and 16 of the MODBUS protocol. Provides sensor gas readings and alarm status for Fault, Inhibit, A1, A2, A3, FIRE, STEL, LTEL and Rate alarms from all channels in the rack.
Supports commands to Inhibit, Reset, Normalise (zero), Calibrate (span) and set Alarm Levels for all channels in the rack. Supports RS485, RS422 and RS232 electrical standards. Data signals isolated from System 57 power supply. Asynchronous serial link configurable for baud rate, parity and stop bits.
Primary and secondary channel operation. Half duplex operation. Multi-drop capability. Easily configured using Engineering Interface Software.

05701-A-0502

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

05701-A-0282 Modbus Interface Module Kit RS422/485

is intended exclusively, in its standard version, for installation in another machine and that its commissioning is forbidden until it has been established that the machine into which this product is to be installed conforms to the provisions of the EC Directive in its version 98/37/EEC.
We confirm that the above-mentioned product conforms to the following standards:
73/23/EWG Low voltage directive
VDE 0530 / DIN 57530 Provisions for rotating machinery
DIN EN 60034-7 Design
DIN 748 Cylindrical shaft ends
DIN 42955 True running, coaxiality and concentricity
DIN EN 60034-14 Vibration class

The 6SM27..107 series of synchronous servomotors is designed especially for drives for industrial robots, machine tools, textile and packing machinery and similar with high requirements for dynamics.
The user is only permitted to operate the motors under the ambient conditions which are defined in this documentation.
The 6SM27..107 series of motors is exclusively intended to be driven by servo amplifiers from the SERVOSTAR series under speed and / or torque control.
The motors are installed as components in electrical apparatus or machines and can only be commissioned and put into operation as integral components of such apparatus or machines.
The motors must never be connected directly to the mains supply.
The thermal contact which is integrated in the motor windings must be observed and evaluated.
The conformity of the servo system to the standards mentioned in the manufacturers declaration on page 6 is only guaranteed when the components (servo amplifier, motor, cables etc.) that are used have been supplied by us