2711-K10C1 PanelView Standard Operator Terminals Allen Bradley

Printing PanelView terminals equipped with an RS-232 printer port can print:
• triggered messages in a message display.
• triggered states of a multistate indicator.
• alarm messages.
• alarm lists.
Print attributes for objects are defined in the application. Any printer that supports the IBM enhanced character set can be connected to the RS-232 printer port of a PanelView terminal. Alarm List PanelView terminals support an Alarm List queue to store information on triggered alarms. The Alarm List stores a maximum of 100 alarms or as many as the terminal can hold in nonvolatile RAM. The number of alarms stored in the list is configured by using the PanelBuilder32 software.
The Alarm List stores the following data for each alarm:
• Acknowledge indicator
• Alarm date and time
• Acknowledge date and time
• Alarm trigger value
• Alarm text including variables
The Alarm List is cleared:
• when an application is downloaded to the terminal.
• when the terminal is reset or power is cycled.
The Alarm List object may appear on the Alarm Banner or other application screens. The data that displays in the Alarm List is configured using the PanelBuilder32 software.

2711-K10C1

# Feature Description
1 Nameplate label Provides product information.
2 Sealing gasket Seals the front of the terminal to an enclosure or panel.
3 COMM Status indicator (green) Indicates when communication is occurring.
4 FAULT Status indicator (red) Indicates firmware or hardware faults.
5 Memory card slot Accepts a memory card which stores applications.
6 Power connection terminals Connects to an external 24V DC power source (18…32V DC).
7 DH-485 communication port Connects to an SLC or MicroLogix controller, DH-485 network, or Wallmount Power Supply (Cat. No. 1747-NP1).
8 DH-485 programming connector Connects to a Personal Computer Interface Converter (Cat. No. 1747-PIC) for transferring applications. Also connects to an SLC programmer, such as the Hand-held Terminal (Cat. No. 1747-PT1).
9 RS-232 (DH-485) communication port Connects to the Channel 0 port of an SLC 5/03, SLC 5/04, or SLC 5/05 controller for point-to-point DH-485 communication. Connects to a MicroLogix controller through an AIC+ Link Coupler. Also connects to the RS-232 serial port of a computer for transferring applications.
10 DeviceNet connector Connects to a DeviceNet network.
11 RS-232 (DF1) communication port Connects to a PLC, SLC, or MicroLogix controller with a DF1 port. This port also connects to the RS-232 port of a computer.
12 RS-232 Printer/File transfer port Connects to a printer (K3A10L1 version only). On a DeviceNet terminal, this port also connects to the RS-232 port of a computer for transferring applications.