330102-00-28-05-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes

The IC695PSD040 is a power supply module that is manufactured by GE Fanuc Automation and included in the RX3i PACSystem. The main purpose of this power supply module is to provide power to backplane. It provides up to 40 Watts of power within a voltage range of 18 to 30 Volts DC. The GE Fanuc Automation IC695PSD040 power supply module comes with 3 different outputs rated at 5.1 VDC; 3.3 VDC and 24 VDC. This module also includes a relay output that can be used to provide power to circuits that are configured to be used as output relay modules. It also has a specific output voltage of 3.3 Volts DC that is intended for use between the RX3i modules that are attached to this circuit.

The GE Fanuc Automation IC695PSD040 power supply module is meant to be installed in a GE RX3i series universal backplane. Only one module of this kind can be installed in this backplane and once it is applied to specific circuits, it cannot be used to supply power in other redundant or increased capacity modes. The GE Fanuc Automation IC695PSD040 power supply module comes with different indicators that show when an internal fault has occurred. This indicator is connected directly to the CPU so that it can detect a loss of power and react accordingly. These indicators are the power indicator, P/S fault indicator, overtempterature indicator, and the overload indicator. The module occupies only one slot in the rack. The module also comes with an on and off switch on the front.