Sale!

DYNAMIC BRAKING UNIT DBU-400 INVERTRON DBU Dynamic Braking Unit

Frequency converters (Inverters) with DC bus and input diode rectifier bridge are suitable for the operation of three phase AC-motors in two drive quadrants, motoring in both directions of rotation.
Braking with more than 10% of the rated inverter current is only possible with a braking unit. Without a braking unit, an excessively rapid deceleration causes an increase in the DC bus voltage.
The regulator responds by
• shut-down due to DC bus overvoltage tripping (e.g. on GV3000: Fault HU)
• extending the set deceleration rate or increasing the output frequency depending on parameter setting.
By the use of a Dynamic Braking Unit (DBU) and braking resistor the energy in the DC bus circuit can be converted to heat.

Add to quote
Categories: ,

Description

概观

Essential details：DYNAMIC BRAKING UNIT DBU-400 INVERTRON DBU Dynamic Braking Unit

Frequency converters (Inverters) with DC bus and input diode rectifier bridge are suitable for the operation of three phase AC-motors in two drive quadrants, motoring in both directions of rotation.
Braking with more than 10% of the rated inverter current is only possible with a braking unit. Without a braking unit, an excessively rapid deceleration causes an increase in the DC bus voltage.
The regulator responds by
• shut-down due to DC bus overvoltage tripping (e.g. on GV3000: Fault HU)
• extending the set deceleration rate or increasing the output frequency depending on parameter setting.
By the use of a Dynamic Braking Unit (DBU) and braking resistor the energy in the DC bus circuit can be converted to heat.

After removing the cover plate of the DBU the blue jumper plug with positions 460V / 415V is accessible at the upper edge of the regulator card (middle on BUC, right on BUA).
This jumper plug defines the DC bus voltage at which the DBU switches the DB resistor to the DC bus.
When delivered from stock the DBU is adjusted for safety reasons to 460 V line voltage.

DYNAMIC BRAKING UNIT DBU-400

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

sunny  He

[Email] sales@saulcontrol.com

[Mobile] 86-18059884797

[WhatsApp] 86-18059884797

[Skype] sales@saulcontrol.com

DYNAMIC BRAKING UNIT DBU-400 INVERTRON DBU Dynamic Braking Unit

To prevent thermal overload of the Braking Unit, assure that the unit works within the following limits:
In a time range of 10 minutes the permissible loading must be limited to the following current-time area of any shape Imax x 2.5 minutes, with the following exception:
On DBU-400 current loading Imax (400 A) is permitted for 110 seconds every 10 minutes.

The diagnostic card BUD, (part No. 813.02.00) is incorporated on units DBU-xx-DIS and all DBU-400.
On units DBU-xx (with PWM-regulator BUC) the diagnostic card option set DBU-DIS (Part No. 839.25.41) can be built in on site or used as a replacement part.
On DBU-400 units the BUD card is always built-in as a standard.
The BUD works independent from the DBU regulator based on separate DC bus voltage feedback values and the voltage across the DB resistor. It replaced the DBU indication card BUB (set 839.25.00) and contains besides the DC bus voltage and braking current indications two additional diagnostic functions (available at terminals).

IS420ESWBH3AX  GE  Analog I/O modules 147663-01 BENTLY Communication analog output module
516TX 336A4940DNP516TX  GE  516TX-A Industrial Ethernet Switch 125800-01 Bently Nevada Key phase input/output module
128277-01  Future Expansion Faceplate  Bently Nevada 140471-01 Bently Nevada Developed I/O module with internal terminal
A413139  PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO 3500/22M 138607-01 Bently  Detector module
D201471 Metso RT node PC AP31 D200137  personality module 3500/94 145988-01 BENTLY Display module
A413188  PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO 3500/42M 176449-02 bently nevada Shaft vibration module
A413331 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO 3500/92 136180-01 bently nevada  Communication gateway module
D201466 Metso RT node PC AP31 D200137  personality module 136180-01 Bently Nevada Communication gateway module
85UVF1A-1QD  Fireye  Integrated Flame Scanner with Internal Flame Relay 3500/92-03-01-00 Bently Nevada 3500/92-03-01-00
516TX 336A4940DNP516TX  GE  A microprocessor device 7264  ABB The four-channel SSI interface module features automatic
516TX-336A4940DNP516TX GE  microcontroller MDB-8E  SARTORIUS Load cell
2MLR-CPUHT HONEYWELL  CPU HT bus function 3500/15 127610-01 Bently Nevada  Digital input module
177313-01-01 BENTLY NEVATA Vibration monitoring module 3500/50 133388-02 BENTLY NEVADA  Tachometer monitoring module 4 channels
PXIE-6556  NI  Automatic industrial control module 3500/40-03-00 176449-01 BENTLY NEVADA  Expansion axial position module
PFCL201CE   ABB   Pressure sensor controller 3500/15 Plastic panel  BENTLY NEVADA   Ac and DC power supplies
MTL BPHM64  Eaton  Safety grid base plate X20CP1586 B&R The core product of B&R’s I/O system line
1794-IF4IXT  Allen Bradley  Flex I/O 1794 series input module IC698PSA350 GE  High capacity power module
1734-IM4 Allen Bradley POINT I/O 4 Point Digital Input Module VMIVME 3215-000 GE  Computer module
1769-ECR Allen-Bradley  Right end cover (ECR) module used together 201TI GE  Microprocessor-based electrical transmitter
136188-02 Bently Nevada  Ethernet /RS232 Modbus I/O module 3500/05-01-02-00-00-01 BENTLY  System rack
AI02J  ABB   Analog input module PM865K02 ABB  controller
DSSA165 ABB  Ac power module 3500/22-01-01-00 138607-01 BENTLY  Transient data interface before and after the size card module
PXIe-1073  NI  PXI Chassis IS420UCSBH4A GE Controller module manufactured by General Electric
F860-CA  HONEYWELL  Series C “fieldbus interface module D201376 METSO Analog input module
DSSA165 ABB  Ac power module D201376 METSO Analog input module
125840-02 Bently Power module IS420UCSBH4A GE Controller module manufactured

Related products