EL100T  10/100BASE-TX to 100BASE-FX Media Converter

The EL100 / EL200 Series provide media conversion between 10/100BASE-T(X) and 100BASE-FX Fiber. Easy plug-and-play design facilitates network infrastructure construction. Through DIP switch selection, Link-Fault-Pass-Through (LFPT) function can be activated or disabled.
The EL100 series is designed for SC or ST fiber connection applications, while the EL200 series is designed for WDM fiber connection. These commercial grade media converters support the EtherWAN
EMC1600 chassis system for easy group installation.

Open the carton and unpack the items. Your package should include an EL100 or EL200 media converter, and this Quick Install Guide. If items are missing or damaged, notify your EtherWAN representative.
Select Installation Location
Place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements:
 The ambient temperature should be between 32 and 113 degrees Fahrenheit (0 to 45 degrees Celsius).
 The relative humidity should be less than 95 percent, non-condensing.
 Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards for IEC 801-3, Level 2 (3V/M) field strength.
 Make sure that the equipment receives adequate ventilation. Do not block the ventilation holes on each side of the equipment.
 The power outlet should be within 1.8 meters of the product.

EL100T