GVC705AE01  3BHB045647R0010 ABB Silicon Controlled Rectifier

Description

Overview

Essential details：GVC705AE01  3BHB045647R0010 ABB Silicon Controlled Rectifier

Products Description

Flame detection equipment is the key equipment in the boiler furnace safety monitoring system (FSSS) of thermal power plants. Its role runs through the whole process from boiler start-up to full load operation. It is used to determine the establishment/extinguishment of the flame in the full furnace or the unit burner, or the presence and absence of fire. The contact of the flame detection equipment accurately acts to send an alarm, and relies on the chain function of the FSSS system to stop the operation of the corresponding powder feeder, coal mill, fuel main valve or primary fan, etc., to prevent the accumulation of fuel in the furnace, and the abnormal situation is ignited to cause the malignant accident of the boiler explosion. Therefore, the equipment performance, that is, the reliability of equipment operation and the accuracy of detection, is directly related to the operation safety and stability of the unit.
The earliest flame detector appeared in the 1950s, the 1960s abroad first developed an ultraviolet flame detector, from the 1970s, there have been foreign flame detectors to detect the release of infrared and visible light when the flame burns, and in the 1980s there was a boiler combustion monitoring device based on images and videos. Later, there were flame detectors with combined probes (infrared and ultraviolet). So far, the detection and discrimination ability of the flame detector has become stronger and stronger, and the detection has become increasingly intelligent.

3BHE039203R0101-GVC736CE101

The essence of the combustion of oil, coal or gas fuel is that the chemical energy of the fuel is released in the form of electromagnetic waves, and the burner flame can generally emit almost continuous luminescence spectrum. The emission source is the high-temperature carbon particles, micro-powder carbon particles and gases generated during the combustion process. The intermediate products in the combustion process of different fuels are not exactly the same or the proportion of intermediate products is different. The spectra emitted by different combustion intermediates are not exactly the same, which is the basis for choosing different types of flame detectors. C2 emits visible light (emission wavelength is about 473.7 nm), CH compounds emit ultraviolet to blue spectrum, carbon particle clusters emit red spectrum, and CO2, H2O, SO2 and other triatomic gases emit infrared light. The spectral distribution characteristics of different fuels are that the oil flame contains a lot of infrared, some visible light, and a small amount of ultraviolet light, and the pulverized coal flame contains a small amount of ultraviolet light, rich visible light and a small amount of infrared light. Gas flame has rich ultraviolet, infrared and less visible light, and for a single burner flame, its radiation spectrum is regularly distributed along the flame axis, for example, pulverized coal boiler pulverized coal burner along the axis from inside to outside is divided into four regions, namely preheating zone, initial combustion zone, safe combustion zone and burnout zone. In the initial combustion zone, not only the visible light is rich and the energy emissivity changes intensively, so it is the best choice for the flame detection probe to accurately align with the initial combustion zone of the burner.

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Shipping

Superiority products GVC705AE01  3BHB045647R0010 ABB Silicon Controlled Rectifier