IC660BPM100 PowerTrac Block Module

The IC660BPM100 is a PowerTrac Block Module. This module is essentially a Power Monitoring device that comes with Genius I/O capability, capable of being directly integrated to Series 90-3, Series 90-70, PACSystem RX3i, and other devices that support the Genius Bus Protocol. This module is formerly manufactured by GE Fanuc Automation, currently under Emerson Automation. The IC660BPM100 is used to voltage and current along with their respective parameters. Specifically, the IC660BPM100 can be used in determining RMS voltage, current, active power, reactive power, KWH, and power factor specifically, Phase to phase (wye and delta) and Phase to neutral (wye system) for voltage; Per phase and neutral for current; Active current, Power and reactive indication per phase; Effective System Power factor (PF). Each value and data calculation are updated every Two (2) seconds. Aside from the measurement of the mentioned parameters, the IC660BPM100 is also capable of detecting overcurrent transients with a configurable threshold value. It can be mounted near a machine or process as it supports Genius communication protocol where data captured and processed by the IC660BPM100 PowerTrac is transmitted to the host controller via the Genius Bus. The IC660BPM100 converts the analog measurement into digitized waveforms for easy and simple analysis of the parameters. This device accepts 3-phase voltage input with an input voltage range of 0-120VAC at 47-63 Hz; Input current of 0-5 Amperes, the nominal range at 47-63 Hz. It has built-in status LEDs indicators that depict Unit OK and Communications OK. The IC660BPM100 has an operating temperature of 5.21” w. X 11.00” h. X 8.06” d. or 13.23cm w. X 27.94cm h. X 20.47cm d. It has an operating temperature of 0 to +60 Degree Celsius or +32F to +140 Degree Fahrenheit.

IC660BBA025K