IC693CHS392J  GE 10-slot expansion baseplate

The IC693CHS392 is a Series 90-30 Platform compatible Expansion baseplate. This hardware allows interconnection of the additional baseplate that hosts Series 90-30 modules to maximize the central controller’s capability and comply with the control requirement of the system especially to accommodate a higher number of I/O points and implement specialty functions. The IC693CHS392 is formerly manufactured by GE Fanuc Automation that is now acquired by Emerson Automation. This baseplate provides Ten (10) installation slots where up to 10 Series 90-30 standard I/O modules and option modules can be installed. This baseplate is compatible for use with CPUs 331, 340, and 341 wherein a maximum of Four (4) baseplates can be interconnected and CPU 350 and higher wherein up to Seven (7) can be installed. When interconnecting baseplates to the CPU baseplate, the maximum cable length must not exceed 50 feet or 15 meters otherwise, the expansion baseplate cannot be recognized by the CPU or the entire configuration is invalid. In addition, intelligent modules such as the PCM, ADC, BEM330, and CMM modules are not compatible with installation to the expansion baseplate. These modules are installed on the CPU baseplate. Aside from the I/O slots, a power supply slot is provided to this baseplate where the power supply module that is used to energize and distribute power is installed. Expansion ports are also available allowing interconnection of other expansion baseplates. This baseplate is designed for panel mounting only, fastened through the provided mounting tabs located on the extreme left and right sides of the hardwire. Proper grounding must also be observed to protect modules and minimize electrical noise.

IC693CHS39