IC694PWR330 power supply module

Description

Overview

Essential details：IC694PWR330 power supply module

Product Description

The IC694PWR330 is a power module that belongs to the GE Fanuc IC694 series. It is mainly used as an extended power supply for GE RX3i PacSystems programmable logic controllers.

The power module can work with any CPU in the RX3i product family, providing up to 30 watts of additional power to the PLC. Its rated input voltage is 120/240 volts AC and 125 volts DC with a rated input current of 0.25 amps.

In addition, the IC694PWR330 PSU does not support load sharing redundancy, but can support loads of 30 watts at 5 volts DC, 20 watts at 24 volts DC isolation, and 15 watts at 24 volts DC relay. It has a rated output voltage of +12V and -12V and a rated output current of 2.5 amps.

The power module has input voltage ratings ranging from 85 to 264 volts AC and 100 to 300 volts DC. At 1 inch or 1.3-N-M, it can handle a torque level of 12 pounds.

IC694PWR330

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

IC694PWR330 power supply module

The IC694PWR330 high-capacity serial expansion power supply module is made by GE Fanuc to serve as an expansion power supply for the GE RX3i PacSystems programmable logic controller or PLCs. The IC694PWR330 power supply module can operate with any CPU in the RX3i product series and it can provide up to 30 Watts of additional power to a PLC. When this module is installed in the PLC, it is meant to be installed in the PLCs serial expansion backplane because it is a serial expansion device. Never attempt to install or remove this module from the serial expansion backplane while the power is applied or user injury or component damage may occur. Its current rating is 2 Amps and it uses a GE 44A724627-109 fuse for protection.

The GE Fanuc RX3i IC694PWR330 high-capacity serial expansion power supply module should only be installed in the serial expansion backplane after the backplane’s rack number selection DIP switch has been set properly. The nominal input voltage ratings for this power supply module are 120/240 Volts AC and 125 Volts DC. The IC694PWR330 power supply module cannot support a load-sharing redundancy, but it can support loads of 30 Watts at 5 Volts DC voltage, 20 Watts at 24 Volts DC isolated voltage, and of 15 Watts at 24 Volts DC relay voltage. It can handle a torque level of 12 pounds on an inch or 1.3 N-m. The input voltage ratings of the IC694PWR330 power supply module are 85 to 264 Volts AC and 100 to 300 Volts DC.