IC695PNC001 RX3i PROFINET Controller (PNC) module

Description

Overview

Essential details：IC695PNC001 RX3i PROFINET Controller (PNC) module

Product Description

The IC695PNC001 is a PROFINET controller module for the GE Fanuc RX3i series. It is capable of connecting PACSystem RX3i controllers to high-speed PROFINET Lans, supports up to 128 I/O points, and can be used to connect various devices such as sensors, actuators, and other controllers.

The module has several features, including high-speed communication, scalability, easy configuration, and powerful diagnostic capabilities. It supports data transfer rates of up to 125 Mbps, allowing fast communication between controllers and connected devices. In addition, it is also scalable, and modules can be added, subtracted and replaced according to actual needs. At the same time, the module is easy to configure and provides a command line interface and a graphical user interface for easy configuration and management. It also has a powerful diagnostic function that reports diagnostic results over the fieldbus, facilitating the generation of error messages on the HMI.

In summary, the IC695PNC001 is a powerful, stable and reliable PROFINET controller module suitable for a variety of industrial automation control systems requiring high-speed communication and scalability.

IC695PNC001

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

IC695PNC001 RX3i PROFINET Controller (PNC) module

The PACSystems* RX3i PROFINET Controller (PNC) module, IC695PNC001, connects a PACSystems RX3i controller to a high-speed PROFINET local area network. It enables the RX3i controller to communicate with IO-Devices on the LAN. The PNC provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 IO Controller, running at both 100 Mbps and 1 Gbps.
The PNC supports 10/100/1000 Mbps Copper, 100/1000 Mbps Multi-mode Fiber, and 100/1000 Mbps Single-mode Fiber. The LAN can include media interfaces of more than one type. PROFINET communications on the LAN require 100 and 1000 Mbps link speed. 10 Mbps cannot be used for PROFINET communications. However, 10 Mbps can be used for other types of Ethernet traffic such as ping and telnet.
Features of the RX3i PNC include:
▪ Full programming and configuration services for the PROFINET Controller, VersaMax PROFINET Scanner and third-party IO-Devices using Proficy Machine Edition .
▪ Firmware upgrades using the WinLoader software utility.
▪ Built-in Command Line Interface function that provides direct monitoring and partial configuration via the micro USB port or using telnet.
Note: The USB port is for system setup and diagnostics only. It is not intended for permanent connection.
▪ Support for star, ring, and daisy-chain/line network topologies.
▪ Four switched Ethernet ports – two 8-conductor RJ-45 shielded twisted pair 10/100/1000 Mbps copper interfaces and two Small Form-factor Pluggable (SFP) cages for user-supplied SFP devices.
▪ Internal clock synchronized with the RX3i CPU for time-stamped diagnostics entries.
▪ Restart pushbutton to manually restart the PNC without power cycling the system.
▪ LEDs: OK, LAN, STATUS, CONFIG, ACTIVE, USB, and four Port LEDs.
▪ Compliant with EU RoHS Directive using the following exemptions identified in the Annex: 7c-I and 7c-III.