IDEC FC4A-J8C1  ANALOG INPUT MODULE

Note 1: Total input system transfer time = sample repetition time + internal processing time
When using FC4A-J4CN1, FC4A-J8C1, or FC4A-J8AT1, the total input system transfer time increases in proportion to the number of channels used.
Note 2: Data processed in analog I/O modules can be linearly converted to values between -32768 and 32767. Send data assigned to analog I/O modules
The repository can optionally specify the range and analog amount of I/O data minimum and maximum. See pages 4-12.
Note 3: When an error is detected, the corresponding error code is stored in the data register assigned to the analog I/O action state. See pages 4-14.
Note 4: This value is measured when a clamp voltage of 500V is provided to the power supply and I/O lines.

• Connect fuses suitable for the voltage and current loss to be applied in the illustrated position. This is required when devices containing MicroSmart are intended for use in Europe
Yes.
• When connecting the resistance temperature meter, connect cables B, B’, and A to CS(current detection), +, and – terminals of input channels IN0 to IN3, respectively.
• When connecting thermocouples, connect the + cable to the + end and the – cable to the CS and – end.
• Do not connect thermocouples to dangerous voltages (60V DC or 42.4V peak or higher).
• Do not connect any wires to unused terminals.
• The – ends of input channels IN0 to IN3 are connected to each other.