1 Year Warranty
Description
Overview
Essential details：IPG315D CGCM / CXCM 2 circuit units
Product Description
The iPro family is made of a wide range of devices developed by Dixell: programmable controllers, expansion boards, valve drivers and graphical interfaces. The combination of these devices allows a complete management of any kind of application in various fields, such as air conditioning, industrial refrigeration, residential refrigeration, etc.
It is an advanced and flexible solution that can be adapted to any need of the customer or of the final application.
Any Dixell product, which is considered a high technology device, requires qualified configuration, programming and commissioning phases to be used in the optimal way possible. Skipping one or more of those phases may cause malfunctioning or damages of the product for which Dixell cannot be held responsible.
Do not use the product for uses that differ from those indicated in this documentation. The costumer assumes any responsibility and risk related to the configuration of the product to reach the desired results according to the final installation and use.
To guarantee the correct functionalities and health of the controller as well as to avoid malfunctioning and damages to the same, it is mandatory respect the following rules:
• Use double insulation transformers for the controller main power supply and never ground the secondary wiring of the transformer.
• Verify that the Ethernet cable and that the Switch\Router used to connect it don’t have the shield grounded.
• In case of shielded cables used for the communication port connections, it is possible to ground the shield only if it is not used as reference for the communication lines and if it is not physically connected in any way to the controller.
• Always check the on the devices connected to the controller (active probes and transducers, loads driven by the analog outputs, devices connected over the communication lines) in order to verify the presence of groundings before powering on the controller. Always verify preventively/in advance the presence of ground meshes in order to remove them before the powering of the plant\electrical board.
IPG315D
Product parameter
READ THE GENERAL WARNINGS AND SAFETY PRECAUTIONS CAREFULLY BEFORE INSTALLING AND USING THE DEVICE.
• This manual is an integral part of the product and must be kept near the device for quick and easy consultation.
• The regulator must not be used for purposes other than those described below, and it especially cannot be used as a safety device.
• Before proceeding with installation and use check the limits of application.
• Dixell Srl reserves the right to vary the components of its products without prior notice to the customer, ensuring the identical and unchanged features of the same.
APPLICATION
• Comply with the temperature and humidity limits specified in this document and on the label on the instrument.
• Uninstall the device only once you have removed all the electrical connections, otherwise the device might break.
• Do not open the device; in case of failure or faulty operation send the instrument back to the dealer/distribu tor or to “DIXELL S.r.l.” with a detailed description of the fault.
• Do not clean the device with corrosive chemical products, solvents or aggressive detergents.
• Communication ports (USB, Ethernet) and voltage output are not designed for purposes not specified in this manual that may damage the controller (for example an excessive current request on the USB port to recharge\supply an external device).
• The device must not be used in applications that differ from those specified in the following guide.
The regulator strictly cannot be installed in the following specific cases:
✓ Units installed in systems with lifesaving functions;
✓ Units for military use;
✓ Units operated in nuclear energy systems;
✓ In all installations where the hardware controller has safety functions
Shipping
Superiority products IPG315D CGCM / CXCM 2 circuit units
| 2MLR-CPUHT HONEYWELL CPU HT bus function | 3500/15 127610-01 Bently Nevada Digital input module |
| 177313-01-01 BENTLY NEVATA Vibration monitoring module | 3500/50 133388-02 BENTLY NEVADA Tachometer monitoring module 4 channels |
| PXIE-6556 NI Automatic industrial control module | 3500/40-03-00 176449-01 BENTLY NEVADA Expansion axial position module |
| PFCL201CE ABB Pressure sensor controller | 3500/15 Plastic panel BENTLY NEVADA Ac and DC power supplies |
| MTL BPHM64 Eaton Safety grid base plate | X20CP1586 B&R The core product of B&R’s I/O system line |
| 1794-IF4IXT Allen Bradley Flex I/O 1794 series input module | IC698PSA350 GE High capacity power module |
| 1734-IM4 Allen Bradley POINT I/O 4 Point Digital Input Module | VMIVME 3215-000 GE Computer module |
| 1769-ECR Allen-Bradley Right end cover (ECR) module used together | 201TI GE Microprocessor-based electrical transmitter |
| 136188-02 Bently Nevada Ethernet /RS232 Modbus I/O module | 3500/05-01-02-00-00-01 BENTLY System rack |
| AI02J ABB Analog input module | PM865K02 ABB controller |
| DSSA165 ABB Ac power module | 3500/22-01-01-00 138607-01 BENTLY Transient data interface before and after the size card module |
| PXIe-1073 NI PXI Chassis | IS420UCSBH4A GE Controller module manufactured by General Electric |
| F860-CA HONEYWELL Series C “fieldbus interface module | D201376 METSO Analog input module |
| DSSA165 ABB Ac power module | D201376 METSO Analog input module |
| 125840-02 Bently Power module | IS420UCSBH4A GE Controller module manufactured |
| 125680-01 BENTLY Displacement detection module | IS220PRTDH1A 336A4940CSP6 GE Controller module |
