MMS6823R 9100-00001-06 Displacement monitor module EPRO

Description

Overview

---

Essential details：MMS6823R 9100-00001-06 Displacement monitor module EPRO

Products Description

RS485 input

Data output mode:

– MODBUS RTU/ASCII

– Ethernet TCP/IPApplication:

The function of communication interface module MMS6823 is to continuously access the MMS6000 module connected to the bus through RS485 bus, and convert the received characteristic value data, alarm and module status data into standard MODBUS protocol. MODBUS output can be MODBUS RTU or MODBUS ASCII. And the received characteristic value data and alarm and module status data into the standard TCP/IP protocol, can be output through the Ethernet RJ45 interface. These data can be connected with the vibration analysis system or DCS, DEH and other systems access and call display.

The MMS6823 allows you to configure the configuration of the connected MMS6000 module. The RS485 bus and MODBUS output are connected via a 48-pin socket on the back of the module. The TCP/IP network interface is a standard RJ45 port, located on the rear panel of the module, and is connected using a standard network cable. The IP address of the MMS6823 can be set as required.

Data entry:

Connect the 48-core socket at the rear of the module to the RS485 bus of the MMS6000 system to obtain data of the MMS6000 module. The transmission rate can be 38400bps or 57,600 BPS.

Transmission data:

? eigenvalue

? Module status data

? Module alarm state

? Module real-time waveform data

Data output:

MODBUS:

MODBUS RTU or MODBUS ASCII protocol can be selected through the Settings, connected through the 48-core socket at the back of the module, the transmission rate is optional.

Ethernet TCP/IP:

The TCP/IP network ports are standard RJ45 ports on the rear panel of the module and are connected using standard network cables. The transmission rate is 10-100Mbps adaptive.

Supply voltage:

18… 24… 31.2V DC redundant power supply, according to IEC 654-2, Grade DC4.

Working environment:

Temperature range:

0 ~ 60℃, in line with DIN 40040 standard, grade KTF.

Storage and transportation environment requirements: -40 ° C to 85 ° C.

Allowable relative humidity: 0 ~ 90%, without condensation.

Allowable vibration: Reference to IEC68-2, Part 6.

Impact allowed:

Refer to IEC68-2, Part 29.

Peak acceleration: 98m/s2;

Rated impact duration: 16ms.

Features:

o Non-contact measurement for static and dynamic displacement. For example:

o Axial and radial axial displacement

o-axis eccentricity

o-axis vibration

o bearing wear

o oil film thickness

o crack detection· Various models meet various industrial requirements

· Meet various international standards, such as API 670, DIN 45670, ISO 10817-1

· It can be used in the environment requiring explosion protection, with the explosion protection rating up to Eex ib IIC T6/T4

· Widely used in steam turbine monitoring and protection systems MMS 3000 and MMS 6000

Application:

Eddy current sensors are widely used in various industrial fields and laboratories. It has the advantages of small size, high reliability and non-contact measurement. It is suitable for all kinds of turbo machinery and can measure physical quantities such as shaft vibration and shaft displacement. epro offers a wide range of eddy-current sensors for a variety of measurement solutions. The following physical quantities can be measured :- clearance between the rotating part and the fixed part – shaft vibration and eccentricity – shaft bending – radial and axial displacement of the shaft – wear of the bearing – thickness of the oil film – relative thermal expansion of the shaft and bearing – thermal expansion of the bearing – The valve position sensor is manufactured and used in accordance with a variety of international general standards, such as: API 670, DIN 45670, and ISO 10817-1. With the addition of safety grids, the sensors and precursors can also operate in environments where explosion protection is required, in accordance with the relevant European standard EN 50014/50020.Working principle:

The eddy current sensor forms an oscillator with the preprocessor, and the amplitude decays as the sensor probe approaches the metal object to be measured. The magnitude of the attenuation is proportional to the distance between the sensor and the object to be measured. The sensor and preprocessor have been linearly calibrated using 42CrMo4 calibration material before delivery. Therefore, no further calibration is required during installation. The user only needs to adjust the air gap between the sensor and the measuring surface until the desired signal is obtained from the output of the preprocessor.

Sensor model:

epro offers eddy current sensors in a variety of models and configurations to meet various measurement and environmental requirements. Sensor with mounting thread or rectangular mounting flange. The measuring range is 1mm to 20mm. Thread sizes are Φ6mm, Φ10mm, and Φ18mm metric or inch threads. Depending on the model, the sensor has the following options:

– Different thread lengths

– The end of the cable can be self-locking waterproof connector or bare wire

– The cable can be armored or unarmored

– The 1 m cable can be connected with or without a connector.

Applicable temperature: -35℃-+380℃

Mechanical size:

PR6422 Mechanical dimensions

PR6423 Mechanical dimensions

PR6424 Mechanical dimensions

PR6425 Mechanical dimensions

PR6426 Mechanical dimensions

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Superiority products MMS6823R 9100-00001-06 Displacement monitor module EPRO

EPRO PR9268/200-000	PR6423/013-130	PR6423/010-140	MMS6823R
PR9268/201-000	PR6426/010-040	PR6424/010-140	PR6423/010-000-CN+CON021
PR9268/202-000	PR6423/010-000-CN+CON021	PR6423/003-030+CON021	PR6423/003-030+CON021
PR9268/202-100	PR6423/003-030+CON021	PR6423/002-041	PR6424/003-030
PR9268/301-000	PR6423/10R-030-CN	PR6423/00R-111	PR6423/10R-030-CN
PR9268/301-100	PR6423/002-030-CN+CON021	PR6423/003-131	PR6423/002-030-CN+CON021
PR9268/302-100	PR6424/003-030+CON021	PR6423/002-020	PR6424/003-030+CON021
PR9268/206-100	PR6424/003-030+CON021	PR6423/003-030+CON021	PR6423/10R-030-CN+CON021
PR9268/601-000	PR6423/10R-030-CN+CON021	MMS6000	PR6424/006-030+CON021
PR6423/013-110	PR6424/006-030+CON021	PR6423/013-130	PR6423/003-030
PR6423/014-030	PR6423/003-030	PR6426/010-040	EPRO MMS6110