Sale!

PM802F-Z  3BDH000002Z1 ABB AC800F controller board

PM802F-Z  3BDH000002Z1 ABB AC800F controller board

Manufacturers ：ABB
Model(s)  ：PM802F-Z  3BDH000002Z1
Additional Information ：AC800F controller board
Estimated Shipping Size
Dimensions: 263 × 58 × 28mm
Weight:.4.3 kg
Country of Origin: United States of America

 

Add to quote
Categories: , SKU: PM802F-Z  3BDH000002Z1

Description

Overview

Essential details：PM802F-Z  3BDH000002Z1 ABB AC800F controller board

ABB PM802F/ABB PM803F Overview:
AC800F controller board ABB PM802F/ABB PM803F has 6 slots and 1 power slot, of which 2 slots use fast DMA technology to directly communicate with the CPU for high-speed data, and these 2 slots are inserted into Ethernet modules to realize the information transmission of the control layer based on standard TCP/IP Ethernet. The remaining 4 slots F1… F4 uses interrupt mode to exchange data with CPU and main memory, each module can generate its own interrupt source, powerful interrupt controller and advanced multi-task operating system can quickly respond to the interrupt information from these four communication modules and quickly exchange data with them. At the same time, through the priority control, the error report information of the communication module can be received in real time. The bandwidth of the data bus of the CPU board is 100MB/s, which ensures that the large amount of information data from various communication modules can be quickly transferred to the CPU unit for processing. In order to ensure the maximum accuracy of the data, the main memory chip of the AC800F CPU unit has the ability of error detection and modification, which can check the 2-bit error of the 32-bit data word and modify the 1-bit error. The PM803 motherboard increases the storage capacity of the main memory to 16MB, and implements the large-capacity control program on the AC800F controller. But the corresponding program keeps the device updated.

ABB PM802F/ABB PM803F Features:

High efficiency superscalar RISC CPU
Coprocessor for dedicated system bus and controller redundancy connection communication
ABB PM802F main memory uses static RAM, with battery holding function to quickly start when the main power failure recovers
The ABB PM803F main memory uses synchronous dynamic random access memory (SDRAM), which can be quickly started when the main power failure is recovered, and has a battery retention function, but because of the larger capacity, the retention time is shorter than the ABB PM802F
The main memory has an automatic error checking and modification capability (EDC unit), which can check for 2-bit errors and modify data words with 1-bit errors
Hardware configuration and diagnostic data are stored in 16K bit EEPROM
The pulse train quickly erases the EPROM for fast ROM operation, this part is mainly used to store the controller curing program, ensuring that the software upgrade does not need to replace the EPROM chip
RS232 serial interface for controller diagnostic services and wireless clock signal interface, this interface is a standard 9-pin type D interface, located on all types of power modules, while supporting redundant controller mode operation
Switches for basic operations of the controller are also set on all types of power modules, such as: run/stop work switch, controller reset switch, redundant manual switch
An LED display of controller status is also set on all types of power modules
Slots E1 and E2 are equipped with redundant battery power to provide automatic battery energy monitoring/alarm and automatic switching to maintain RAM data
CPU mainboard temperature monitoring, periodic temperature measurement
Cumulative controller normal and high temperature operating time
All fieldbus modules can be plugged and unplugged while the system is running
Due to the use of IC interface, F1… The F4 slot bus module can automatically identify and reload configuration data to realize the function of both plug and use
Data error signal recognition and processing from module
Each bus module generates up to four different interrupt sources
Each module reserves an address domain of 8MB for memory access and 8MB for I/O access
Operating temperature range 0… 60~C, no forced cooling is required, please note that this refers to the indicator when the controller is an integral package
Internal operating voltage monitoring
The independent watchdog module is used to protect the operating system from deadlocks
The battery keeps the system real-time clock
Power failure signal alarm

PM802F

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

sunny  He

[Email] sales@xiongbagk.cn

[Mobile] 86-18059884797

[WhatsApp] 86-18059884797

[Skype] sales@saulcontrol.com

PM802F-Z  3BDH000002Z1 ABB AC800F controller board

ABB PM802F CPU motherboard Technical specifications:

Weight: 1600g. The CPU mainboard is installed in the rack, excluding power supply, modules, and empty panel
Power consumption: depends on CPU load and cycle time: typical: 6W; Max: 7.8W
Voltage monitoring:
If one of the two internal voltages of the CPU board is lower than the threshold, the CPU board resets

The two supply voltage standards are: 5V+ / – 3%, 3.3V + / – 3%

5V Reset threshold: 4.65V

3.3V Reset threshold: 3.08V

Power failure: When the power module fails, a power failure signal will be generated within 20ms. At this time, the power module ensures the working Tpf time, and ensures the normal emergency shutdown of the power supply or process: Tpf >15 ms
CPU: Intel 80960HD 25/75, superscalar RISC processor, 32-bit, CPU clock 75MHz, 150MIPS
RAM: 32-bit, battery retention function provided through E1 and E2 slots 4MB Static RAM(SRAM)
Battery retention: Lithium battery 3.6V >700mAh, available through E1 or E2 slot, redundancy configuration can improve retention time, usually > 1.5 years
EDC unit: Provides check and check function for every 32 bits of data to improve data reliability: modify 1 bit error; Mark a 2-bit error
EPROM: The pulse train quickly erases the EPROM for fast access, and can be programmed with special programs when installing system software without updating the EPROM: 4MB 32-bit
EEPROM: Configuration data storage, diagnostic data storage, serial 16K bit EEPROM
Test interface: RS232 serial interface, 9600/19200 baud rate
Temperature monitoring: When the controller works in excess of the specified temperature range, the MTBF time will be shortened. The temperature will be measured periodically and the alarm will be raised when the limit value is exceeded. The alarm signal will be automatically reset after the delay temperature is lower. The normal temperature running time and the high temperature running time will be accumulated independently
Plug and unplug fieldbus modules: E1… The module in slot E4 can be inserted and removed when the controller is running
Watchdog: The independent Watchdog module automatically resets the watchdog module if no trigger operation is performed within a specified period of time. This operation prevents deadlocks in the operating system
Real-time clock: The time and date of the real-time clock must be set when the control is first used, and the clock can be kept running by the battery
ABB PM803F CPU motherboard Technical specifications:

Weight: 1600g. The CPU mainboard is installed in the rack, excluding power supply, modules, and empty panel
Power consumption: depends on CPU load and cycle time: typical: 6W; Max. : 10W
Voltage monitoring:
If one of the two internal voltages of the CPU board is lower than the threshold, the CPU board resets

The two supply voltage standards are: 5V+ / – 3%, 3.3V + / – 3%

5V Reset threshold: 4.65V

3.3V Reset threshold: 3.08V

2.5V Reset threshold: 2.32V

Power failure: When the power module fails, a power failure signal will be generated within 20ms. At this time, the power module ensures the working Tpf time, and ensures the normal emergency shutdown of the power supply or process: Tpf >15 ms
CPU: Intel 80960HT 25/75, superscalar RISC processor, 32-bit, 75MHz, 150MIPS
RAM: 32-bit, with battery retention provided in E1 and E2 slots 16MB synchronous dynamic random access memory (SDRAM)
Battery retention: Lithium battery 3.6V, >960mAh, available through E1 or E2 slot, redundancy configuration can improve retention time, usually >20 days
EDC unit: Provides check and check function for every 32 bits of data to improve data reliability: modify 1 bit error; Mark a 2-bit error
EPROM: The pulse train quickly erases the EPROM for fast access, and can be programmed with special programs when installing system software without updating the EPROM: 4MB 32-bit
EEPROM: Configuration data storage, diagnostic data storage, serial 16K bit EEPROM
Test interface: RS232 serial interface, 9600/19200 baud rate
Temperature monitoring: When the controller works in excess of the specified temperature range, the MTBF time will be shortened. The temperature will be measured periodically and the alarm will be raised when the limit value is exceeded. The alarm signal will be automatically reset after the delay temperature is lower. The normal temperature running time and the high temperature running time will be accumulated independently
Plug and unplug fieldbus modules: E1… The module in slot E4 can be inserted and removed when the controller is running
Watchdog: The independent Watchdog module automatically resets the watchdog module if no trigger operation is performed within a specified period of time. This operation prevents deadlocks in the operating system
Real-time clock: The time and date of the real-time clock must be set when the control is first used, and the clock can be kept running by the battery

Related products