REB500 Distributed busbar protection REB500

Rated Voltage:
For example: AC 220V, 380V, 415V, 480V, etc., or DC 24V, 48V, 110V, 220V, etc.
Rated Current:
For example: 5A, 10A, 20A, 50A, 100A, etc.
Frequency Range:
For example, 50Hz or 60Hz.
Trip Time:
For protection devices, this is the time required from the detection of the fault to the execution of the protection action. For example, milliseconds (ms) or seconds (s).
Trip Current:
For overcurrent protection devices, this is the current threshold that triggers the protection action.
Reset Time:
The time required for the device to return to the normal state after the fault is rectified.
Communication Interface:
For example: Modbus RTU, Modbus TCP, Ethernet IP, Profibus, CANopen and so on.
Protection Class:
For example, the IP rating (such as IP20, IP54, IP65, etc.) describes the dust and water resistance of the device.
Operating Temperature:
For example: -25°C to +70°C.
Storage Temperature:
For example: -40°C to +85°C.
Power Requirement:
For example, AC 220V ±10% or DC 24V ±5%.
Power Consumption:
The power consumption of a device under normal operating conditions, usually in watts (W).
Dimensions:
The length, width, and height dimensions of the device, usually in millimeters (mm).
Weight (Weight) :
The net weight of the equipment, usually in kilograms (kg).
Accuracy:
For measuring equipment, this is the range of deviation between the measured value and the true value.
Diagnostic Function:
Devices may have self-diagnostic capabilities that detect and report device status, fault information, and so on.