RSER200-4/603444 I/O interface.network hub/repeater and serial line interface

The RSER200-4 is a module in the Kongsberg RIO200 modulefamily. These modules provide functions such as I/O interface.network hub/repeater and serial line interface. They have thesame shape and are mechanically mounted on a horizontaldual-rail system.
The RSER200-4 is a four channel, galvanic isolated, serialline, interface module that can be linked to one. two or threecontrollers (RCUs). The four feld channels are individuallyconfgurable as either RS232,RS422, RS485 Or NMMEA 0183 forconnection to field equipment. There are three Link Channelinterfaces for connection to the controllers.
The RSER200-4 is powered by the RBUS connectors.The RSER200-4 contains the following features:Isolated serial line feld channels
Run/error LED on front showing module statusBlinking LEDs on front showing transmit and receive dataactivity for each channel
All internal voltages are monitoredAllow hot module replacementCompliant to standards IEC 60945 and IACS E10

The RSER200-4 is a serial line module used for connectingserial line equipment to RCU(s) in single or redundant controllersystems.
The module can be connected to up to three controllers (A, B, C)via the three RJ45 connectors (Pl, P2, P3), and up to four feldequipment (1,2,3, 4) via the four terminal blocks (X1.X2.X3X4).
The module contains a USB interface (P4) intended for test andservice purposes. It provides functions to monitor the serial lineactivity and the general status of the module.
The RSER200-4 consists of the main function blocks as shownin the function diagram (see Figure l for block/function diagramof the RSER200-4)
Power supply
Processor and channel logic
Link and feld interfaces
USB interface
LEDs(Status, RX and TX)

RMP201-8