Sale!

XVS-430-57MPI-1-10 XVS400 5.7/8.4 MICRO PANEL

XVS-430-57MPI-1-10 XVS400 5.7/8.4 MICRO PANEL

XVS400 5.7″/8.4″ and MS2 5.7″ are two different names of equivalent products.
MICRO PANELs XVS400 5.7″/8.4″; MS2 5.7″ can be used as HMI devices or as integrated HMI/PLC devices.
MICRO PANELs XVS400 5.7″/8.4″; MS2 5.7″ are primarily used in machine and system building. They are designed exclusively for the visualization, operation and control of machines and systems. Any other use must be agreed beforehand with the manufacturer.

Add to quote
Categories: ,

Description

Overview

Essential details：XVS-430-57MPI-1-10 XVS400 5.7/8.4 MICRO PANEL

XVS400 5.7″/8.4″ and MS2 5.7″ are two different names of equivalent products.
MICRO PANELs XVS400 5.7″/8.4″; MS2 5.7″ can be used as HMI devices or as integrated HMI/PLC devices.
MICRO PANELs XVS400 5.7″/8.4″; MS2 5.7″ are primarily used in machine and system building. They are designed exclusively for the visualization, operation and control of machines and systems. Any other use must be agreed beforehand with the manufacturer.

A nameplate is fixed on the rear of the device in order to identify it. The nameplate contains the following information:
 Manufacturer address
 Type designation
 Power supply required
 Part no. (Part-No or Art.-No)
 Serial no.
 Time of manufacturing (week/year)
 Approval mark and information to the approval
 Arrangement of interfaces and operating elements
 Permissible mounting options (top edge «Top») Support To ensure fast and optimum support always provide the support personnel with the following information on the nameplate:
 Part no. (Part-No or Art.-No)
 Serial no.

XVS-430-57MPI-1-10

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

sunny  He

[Email] sales@saulcontrol.com

[Mobile] 86-18059884797

[WhatsApp] 86-18059884797

[Skype] sales@saulcontrol.com

XVS-430-57MPI-1-10 XVS400 5.7/8.4 MICRO PANEL

Hazards may still occur even though the device meets the current state of the art and complies with all recognized safety requirements.
The device must only be installed and commissioned in perfect technical condition and in compliance with this document.

The following points must be observed so that the device meets the contractual requirements:
 Only qualified personnel may work with the device.
 These persons must have read the Operating Instructions and must observe the requirements described.
 The ambient conditions stated must be observed. See Chapter 9.9 Ambient conditions,  60.
 The maintenance work must be carried out correctly.
 Potentially explosive atmosphere, Zone 22:
The ground resistance of accessible metal parts must be less than 109 ohms.
No liability is accepted for damage, consequential damage and accidents caused by the following:
 Failure to observe work safety regulations
 Failure or malfunction of the device
 Improper handling or use
 Failure to observe the Operating Instructions
 Conversions, modifications and repairs to the device

Related products